• Feel free to contact us: Mobile: 0344 3813810 Power quality analysis plus a scope and a meter!! The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance. The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. Features include:
    • New! NiMH Battery provides extended operating time of 6.5 hours
    • Combines the most useful capabilities of a power quality analyzer, multimeter and scope
    • Simulates 3-phase power (assuming balanced loads) from a single-phase measurement
    • Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
    • Monitoring functions help track intermittent problems and power system performance
    • Menus use familiar electrical terminology
    • New! Toggle through the most commonly used power quality modes with a single keystroke
    • Records two selectable parameters for up to 16 days
    • New! 20 measurement memories to save/recall screens and data with cursor readings
    • FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
    • Measures resistance, diode voltage drop, continuity, and capacitance
    • Users / applications manual and power quality video to help answer tough questions
    • Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable
    • 3 year warranty on the Fluke 43B, 1 year on accessories
    What’s Included:
    • C120 Hard Case
    • TP1 Flat-tipped Slim-Reach™ Test Probes
    • TP4 4 mm Round Slim-Reach™ Test Probes
    • i400s AC Current Clamp
    • OC4USB Optically Isolated USB Interface Adapter
    • BP120MH Rechargeable NiMH Battery Pack (installed)
    • PM 8907 Line Voltage Adapter/Battery Charger
    • SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
    • Shielded Banana-to-BNC Adapter
    • Users Manual / Application Guide
    • Power Quality CD-ROM
  • Feel free to contact us: Mobile: 0344 3813810
    Versatile digital multimeter for maintenance, field service and bench repair. The NEW Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. The Fluke Model 77-IV is a battery-powered, average responding-rms indicating multimeter, with a 6000-count, 3 3/4-digit display, and a bar graph. Measures:
    • AC / DC voltage & current
    • Wide 1000 V measurement range
    • Average responding AC measurements
    • 0.3% accuracy
    • 10 Amps continuous (20A for 30 seconds)
    • Frequency and capacitance
    • Resistance and continuity
    • Diodes
    This multimeter meets the CAT III and CAT IV IEC 61010 standards. Look at the Fluke 73-III Digital Mulitimeter or the waterproof design Fluke 27-YEL Analog/Digital Multimeter What’s Included:
    • Fluke TL75 test leads
    • 9 V battery (installed)
    • Manual
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 787 Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool. A maintenance and calibration tool that will be at home in every instrumentation technician’s tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the Fluke 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you’re tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power – the Fluke 787 ProcessMeter. Also see the Fluke 789 ProcessMeter What’s Included:
    • Alligator Clips
    • Protective Yellow Holster with test lead storage
    • One 9V alkaline battery
    • Fluke TL75 Safety-Designed Test lead Set
    • Product over and Users Manual (CD-ROM) in 14 languages
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. The Fluke 87V/E2 Industrial Electrician Combo Kit makes troubleshooting more productive with standard meter hanging accessory for handsfree operation, soft case for protection and storage, 1.5 m heat resistant silicone test leads and more. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    •  Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    •  Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. See the Fluke 87V – Industrial True-rms Multimeter with Temperature Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke 87V Industrial Multimeter
    • Fluke AC220 retractable long reach alligator clips
    • Fluke C35 lightweight soft case to provide optimal protection and storage
    • Fluke TPAK ToolPak meter haning accessory to hold meter to steel surfaces
    • Fluke TL224 1.5 m silicone leads resist head
    • Fluke TP238 removable probes with 4 mm of exposed metal to use on industrial circuits
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK K-type temperature probe
  • Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications
    • 5.5 digit resolution
    • Basic V dc accuracy of 0.01 %
    • Dual display
    • Dedicated dc leakage current measurement
    • 2×4 ohms 4-wire measurement technique
    • Six dedicated buttons for fast access to instrument setups
    • Hi/Lo limit compare for Pass/Fail testing
    The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. Six setup buttons on the Fluke 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy! The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement. What’s Included:
    • Meter
    • TL71 test leads
    • Line cord
    • Spare line fuse
    • Statement of cal practices
    • WEEE information sheet
    • Warranty statement
    • Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
    • CD Rom with user manual (English)
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 8845A Bench Top 6.5 digit Precision Multimeter has the precision and versatility to handle your most demanding measurements, on the bench or in a system. These meters are both high performance and feature rich, yet also remarkably easy to use. The Fluke 8845A Bench Top 6.5 digit Precision Multimeter performs the functions you would expect to see in a multifunction DMM, including measuring volts, ohms, and amps. Basic V dc accuracy of up to 0.0024 %, 10 A current range, and a wide ohms range give you an unbeatable combination of measurement capability. You can also use the the Fluke 8845A Bench Top 6.5 digit Precision Multimeter to measure frequency and period.  The functions of a counter, capacitance meter, and thermometer are built in for unparalleled versatility. Extend the meters’ utility even more with their graphical display modes, including Trendplot paperless recorder mode, statistics and histograms—features you won’t find on other multimeters. Of course, the meter is also durable and dependable, features you expect from any Fluke meter. This unique combination of features and performance makes the Fluke 8845A Bench Top 6.5 digit Precision Multimeter an unbeatable value for a wide variety of applications, including manufacturing test, research and development, and service. What’s Included:
    • TL71 Test Lead Set, Premium DMM
    • LCI Line Core
    • Spare Line Power Fuse
    • Statement of Calibration Practices
    • WEEE Information Sheet
    • Warranty Information
    • Programmer, Users and Service Manuals (CD-ROM)
    • FlukeView Forms – Basic for 8845/8846
  • Feel free to contact us: Mobile: 0344 3813810
    A complete automotive diagnostic package with everything you need in an automotive multimeter The new Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty. The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection. Combo Kit Includes: 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual. The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. What’s Included:
    • Fluke 88V Automotive Multimeter
    • Fluke TL224 Heat Resistant Silicone Test Leads
    • Fluke TP220 Removable Sharp Point Test Probes
    • Fluke AC285 Large Jaw Alligator Clips
    • Fluke TPAK Magnetic Hanger
    • Fluke 80BK Temperature Probe
    • Fluke RPM80 Inductive Pick-up
    • Automotive Backprobe Pins
    • Insulation Piercing Probe
    • Packaged in a durable carrying case (Fluke C800)
  • Feel free to contact us: Mobile: 0344 3813810
    • CAT III Rating 600v
    • Low Pass Filter
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
     
  • Feel free to contact us: Mobile: 0344 3813810
    Electrical tester with OpenJawTM Current The Fluke T5-1000 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-1000, all you have to do is select volts, ohms, or current and the tester does the rest. The OpenJawcurrent lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReachtest probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Also available in 600V – see the Fluke T5-600 Voltage, Continuity and Current Tester
  • Feel free to contact us: Mobile: 0344 3813810
    Has your solenoid tester ever over-heated, melted, burned out, or worse? The new, full-featured Fluke T+PRO Electrical Tester offers all the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. The Fluke T+PRO Electrical Tester is the ideal, full-featured tester for the demanding commercial and industrial electrician.  With voltage measurement, continuity, built-in flashlights, GFCI trip capability, and Fluke’s legendary ruggedness and reliability, the tester is an excellent choice for most residential, commercial, and industrial applications. The Fluke T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing. The Fluke T+PRO helps electricians comply with NPFA 70E Article 110.9 (A), which states that “Test equipment … shall be rated for circuits and equipment to which they will be connected. The T+PRO Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work. Applications:
    • Industrial electricians, commercial electricians, particularly those who work on low-voltage lighting.
    • Front-line electrical troubleshooting
    • AC/DC voltage measurement
    • Continuity testing
    • Testing GFCI circuits
    • Resistance measurement
    • Checking the rotation of electrical motors
    • Checking the proper set up of 3-phase systems
    • Troubleshooting low-voltage lighting
    What’s Included:
    • User manual
    • Test lead wrap
    • Fluke TP2 test probes
    • 2 AAA batteries
  • HP Textile Yarn Package Hardness Tester The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.
  • KIMO has designed and manufactured the flow cones as an essential instrument for measuring direct air flows in ventilators and HVAC systems. These instruments can be associated with the hot wire and vane Ø 100 mm anemometers from Class 100, 200 and 300 portable instruments. Many models are available according to the flow, the dimensions of the diffusers and the probe used.
  • Multi-parameters portable device : Pressure, air velocity, airflow, hygrometry, temperature, air quality, tachometry. Memory : up to 12 000 measurement points Dataloger software for data recording and processing (option). Supplied with calibration certificate and alu transport case.
  • unctions : Relative humidity, dew point and temperature. Measuring range Humidity : 5 to 95 %HR Temperature : -20 to +80°C Dew point : -40 to +80°Ctd Supplied with hygrometrie probe, transport case and calibration certificat
Go to Top