- Fluke TL75 test leads
- Holster
- Users manual
- and 9 V battery (installed).
Feel free to contact us: Mobile: 0344 3813810 True-rms Basic Multimeter designed for basic electrical testsThe Fluke 113 Basic Multimeter gives utility users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems.The Fluke 113 Basic Multimeter has significant improvements over Fluke’s original 7-600, and other utility multimeters. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity.The Fluke 113 Basic Multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this new meter is a must have for the utility users toolbox.What’s Included:- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair.The Fluke 175 True-rms digital multimeter has the features needed to find most electrical, electronic, electro-mechanical and heating and ventilation problems. Simple to use with significant improvements like True-rms, frequency, capacitance and min-max record.Check the features and specifications using the tabs above.Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes.Want better accuracy and a backlight see the Fluke 177 Also available with temperature as Fluke 179
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 434/PWR power analyzer is the ideal tool for finding energy waste in commercial and factory buildings and equipment. Electricians, field service engineers and maintenance technicians can use this special edition instrument to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis according to EN 50160. Fluke’s 434/PWR is a complete three-phase troubleshooting tool that measures virtually every power system parameter: voltage, current, frequency, power, energy consumption, cos f or power factor, unbalance, and harmonics and inter-harmonics.The Fluke 434/PWR is an upgraded version of the popular 434 model. It now includes the previously optional logging feature, Inrush and Transients measurement functions. In addition, it includes four iFlex 430, flexible current probes and a new soft case. The bundled PowerLog software enables logged files to be downloaded and reports generated automatically (the standard voltage leads and clips are included).
Load studies and energy assessments
- Monitor maximum power demand over user-defined averaging periods
- Demonstrate the benefit of efficiency improvements with energy consumption tests
- Measure harmonic distortion caused by electronic loads
- Analyze reliability problems by capturing voltage dips and swells from load switching
Applications
- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Frontline troubleshooting – quickly diagnose problems on‐screen to get your operation back online
- Quality of service compliance – validate incoming power quality at the service entrance
- Long‐term analysis – uncover hard‐to‐find or intermittent issues
- Analyze reliability problems by capturing voltage dips and swells from load switching
- i430-Flexipack 4 current clamps
- 5 Test leads, 4 black, 1 green
- 5 Alligator clips, 4 black, 1 green
- BC430 Battery charger eliminator
- Power Log Software
- OC4USB Optical cable for USB
- WC100 Color localization set
- Getting Started (booklet)
- User Manual (CD-ROM)
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging.The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more.With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues.Set up the 1735 in seconds, with the included flexible current probes and color display.The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application.The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button.Applications:
- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
- Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 435 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues.The Fluke 435 offers unique features like AutoTrend, which records everything on the screen automatically; System-Monitor, a quick diagnosis of system performance against user defined limits; Logger Function with multi-parameter logging; and Mains Signaling, measures interference from ripple control signals at specific frequencies. These features help to quickly diagnose problems and build benchmarks for predictive maintenance.The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality.Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 435 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes.Full measurement capability and the highest safety rating Fully Class A Compliant – conduct tests according to the stringent international IEC 61000-4-30 Class A standard. With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 435 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells.Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (16 MB) memory stores up to 50 screens. A detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports.If any of these situations apply to you, then this tool is for you:
- Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
- Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
- Quality of Service Compliance – Validate incoming power quality at the service entrance
- Long-term Analysis – Uncover hard-to-find or intermittent issues
- Load Studies – Verify electrical system capacity before adding loads
- Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving device
- Fluke C435 Water-tight hard case with rollers
- Fluke i430s 4x 3000A flexible current clamps, CAT IV 600 V rated
- Fluke TLS430 5 Test leads, 4 black, 1 green
- Fluke BC430 Battery Charger Eliminator
- FlukeView Software SW43W
- Fluke PowerLog Software
- Fluke OC4USB Optical Cable for USB
- Fluke WC100 Color localization set
- Getting Started printed
- User Manual (CD-ROM)
- Feel free to contact us: Mobile: 0344 3813810 Pinpoint power problems faster, safer and in greater detail!The Fluke 434 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues.The Fluke 434 offers unique features like AutoTrend, which records everything on the screen automatically, and System-Monitor, a quick diagnosis of system performance against user defined limits and Logger Function (optional functionality can be added with upgrade kit Fluke 434/LOG). Together the features help to quickly diagnose problems and build benchmarks for predictive maintenance.The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality.Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 434 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes.Full measurement capability and the highest safety rating With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 434 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells.Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (8 MB) memory stores up to 50 screens and up to 10 measurements each comprising 32 parameters – including setups and trend data – recorded for more than a year, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports.If any of these situations apply to you, then this tool is for you:
- Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
- Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
- Quality of Service Compliance – Validate incoming power quality at the service entrance
- Long-term Analysis – Uncover hard-to-find or intermittent issues
- Load Studies – Verify electrical system capacity before adding loads
- Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving devices
- Fluke C430 Hard carrying case
- Fluke i400s 4 current clamps, CAT IV 600 V
- Fluke TLS430 5 Test leads, 4 black, 1 green
- Fluke BC430 Battery Charger Eliminator
- FlukeView Software SW43W
- Fluke OC4USB Optical Cable for USB
- Fluke WC100 Color localization set
- Getting Started printed
- User Manual (CD-ROM)
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:
- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging.The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more.With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues.Set up the 1735 in seconds, with the included flexible current probes and color display.The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application.The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button.Applications:
- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
- Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
- Feel free to contact us: Mobile: 0344 3813810 he Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:
- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
- Feel free to contact us: Mobile: 0344 3813810 Power quality analysis plus a scope and a meter!!The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance.The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures.Features include:
- New! NiMH Battery provides extended operating time of 6.5 hours
- Combines the most useful capabilities of a power quality analyzer, multimeter and scope
- Simulates 3-phase power (assuming balanced loads) from a single-phase measurement
- Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
- Monitoring functions help track intermittent problems and power system performance
- Menus use familiar electrical terminology
- New! Toggle through the most commonly used power quality modes with a single keystroke
- Records two selectable parameters for up to 16 days
- New! 20 measurement memories to save/recall screens and data with cursor readings
- FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
- Measures resistance, diode voltage drop, continuity, and capacitance
- Users / applications manual and power quality video to help answer tough questions
- Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable
- 3 year warranty on the Fluke 43B, 1 year on accessories
- C120 Hard Case
- TP1 Flat-tipped Slim-Reach™ Test Probes
- TP4 4 mm Round Slim-Reach™ Test Probes
- i400s AC Current Clamp
- OC4USB Optically Isolated USB Interface Adapter
- BP120MH Rechargeable NiMH Battery Pack (installed)
- PM 8907 Line Voltage Adapter/Battery Charger
- SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
- Shielded Banana-to-BNC Adapter
- Users Manual / Application Guide
- Power Quality CD-ROM
- Feel free to contact us: Mobile: 0344 3813810
