• Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke. Compact true-rms meter for electrical troubleshooting.  The Fluke 114 is a battery-powered, true-rms multimeter the perfect troubleshooting tool for “go/no-go” testing.  It includes a feature to prevent false readings caused by ghost voltage. Also check out the Fluke 115 Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. What’s Included:
    • Holster
    • Installed 9 V battery
    • Test leads
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke. Compact true-rms meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.
  • Feel free to contact us: Mobile: 0344 3813810
    Designed by electricians. Engineered by Fluke. The Fluke 116 HVAC Multimeter features temperature and microamps measurements useful for heating, ventilation, air conditioning and refrigeration (HVAC/R) technicians.  The Fluke 116 is a compact true-rms meter and has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. The Fluke 116 also, has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
    • Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
    • LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
    Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. What’s Included:
    • 4 mm silicone test lead set
    • 80BK Integrated Temperature probe
    • Holster
    • Installed 9 V battery
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810
    For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician’s Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case. 3-year product warranty on Fluke-116 DMM, 2-year warranty on Fluke-62 IR Thermometer and 1-year warranty on accessories What’s Included:
    • Fluke 116 HVAC Multimeter with Temperature and Microamps
    • Fluke 62 Infrared Thermometer
    • Fluke TL75 Hard Point Test Lead Set
    • Fluke TPak ToolPak Magnetic Meter Hanging Strap
    • NEW! Fluke C115 Deluxe carrying case with shoulder strap
    • Fluke 80BK Integrated Temperature Probe
    • Fluke 80AK Thermocouple Adapter
    • NEW! Fluke 80PK-11 Pipe Wrap Thermocouple
  • Feel free to contact us: Mobile: 0344 3813810
    Designed by electricians. Engineered by Fluke. Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster. The Fluke 117 has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
    • Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
    • LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
    The Fluke 117 also includes the built-in VoltAlert non-contact voltage function.  Located on the top of the meter above the LCD display, it’s another feature handy for detecting the invisible. The VoltAlert function detects the presence of ac voltage, sounds an audible tone and activates a red LED indicator light on the top center of the LCD display.  Using this feature before making a contact measurement can add an extra layer of safety. Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 116 HVAC Multimeter with Temperature and Microamps. What’s Included:
    • 4 mm silicone test lead set
    • Holster
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810
    This combo kit pairs the new Fluke 117 DMM with a Fluke 322 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. 3 years warranty on Fluke 117 DMM, 2 years warranty on Fluke 322 Clamp meter and 1 year on accessories. What’s Included:
    • Fluke 117 True-rms Digital Multimeter with non-contact voltage detector
    • NEW! Fluke C115 Deluxe carrying case with shoulder strap
    • Fluke 322 Compact Clamp Meter
    • Fluke TL75 Hard Point Test Lead Set
    • Fluke TPAK ToolPak Magnetic Meter Hanging Kit
  • Feel free to contact us: Mobile: 0344 3813810
    Three-in-one simplicity for fast answers wherever you work. In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The Fluke 124 ScopeMeter meet today’s need of simultaneously measuring and checking waveforms. For industrial, electronic or electro mechanical applications, the compact Fluke 124 Industrial ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. It features 40MHz bandwidth, Connect-and-View  triggering automatically displays stable waveforms of virtually any signal and a dual DMM and a paperless recorder to get virtually any job done. It is a truly integrated test tool in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.
    • Dual-input 40 MHz digital oscilloscope.
    • Two 5,000-count true-rms digital multimeters.
    • 20 save setups and screens
    • Cursor measurements
    • A dual-input TrendPlot recorder.
    • Connect-and-View trigger simplicity for hands-off operation.
    • Shielded test leads for oscilloscope, resistance, continuity and capacitance measurements.
    • Up to seven hours battery operation with standard battery
    • CAT III 600 V safety certified.
    • Optically isolated RS-232 interface.
    • Rugged compact case.
    See the Fluke 124 Color ScopeMeter Other models are the Fluke 123; Fluke 123S What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP120 MH
    • User manual (CD-ROM)
    Also comes with the SCC120 kit which includes:
    • Fluke C190 Hard Carrying Case;
    • Fluke OC4USB Optically isolated USB-Cable;
    • Fluke SW90W/034EFG FlukeView ® Software for Windows. English, French and German language
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 125 Industrial ScopeMeter is a rugged, reliable solution for industrial troubleshooting and installation applications.  Integrated test tool, with oscilloscope, multimeter, and “paperless” recorder in one affordable, easy-to-use instrument. As the latest addition to the Fluke 120 Series ScopeMeters, the Fluke 125 has advanced features for installing and troubleshooting field buses and electrical machines. The ScopeMeter performs a bus health test on industrial buses, for example, which are rapidly becoming a headache for Service, Maintenance and Installation (SMI) engineers. The test quickly determines whether the bus is working and if not, helps to identify the cause. The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet. In addition, the instrument can test power input, sensor timing, motor windings, drive output timing and power measurements – thus eliminating the need for expensive, more specialized test equipment. The ScopeMeters are 600 V CAT III safety certified for machinery, instrumentation, control and power systems. The new Fluke 125 has all the features of the successful Fluke 123 and Fluke 124 ScopeMeters and, in addition to the bus health test, it also carries out effective (Vpwm) voltage measurements of motor drive output, and has 0.01 ohm resolution on the 50 Ohms range for testing motor windings. User-named data setups make for easy use.  The 125 extends the 120 series by adding;  Industrial networks bus health testing and Measure harmonics and power, VA, VAR, W, and PF Simple good/bad readout for Field Bus parameters The bus health tests of the Fluke 125 ScopeMeter find defects like bad or missing terminators, bad cable splits, missing links, incorrect line loading, line interrupts, short circuit conditions and reflections. The instrument continuously acquires the bus signal and compares parameters to official specifications. It displays bus speed and measures signal quality with ‘good’ or ‘bad’ indications for parameters like rise- and fall-time, amplitude, bias level, pulse width and distortion. The instrument checks at the hardware (not protocol) level. An eye-pattern mode allows for a visual check of signal integrity. Harmonic analysis and power consumption Extended Harmonics Analysis of mains waveforms reaches up to the 33rd harmonic. That includes the important 3rd and 5th harmonics, which may be the cause of overheating in neutral wire or motor, as well as flat-topping of the mains voltage from non-linear loads like SMPS units. The wide frequency range covers railway (16.66 Hz) and airplane systems (400 Hz) applications. Power measurements cover single-phase and balanced-3-phase, 3-wire systems (Watt, VA, VAR and Power Factor). Unlike PQ analyzers, the instrument is not restricted to 50/60 Hz, and can measure power at the output of motor drives and frequency converters. The Vpwm measurement capability shows the output voltage of motor drives exactly as the motor perceives it. For electrical and combustion engines, the 125 can indicate revolutions-per-minute (rpm), and can be set up for 1 or 2 rotations per pulse, or 1 rotation per 2 or 4 pulses. A 50-ohm resistance range brings excellent 0.01-ohm resolution for checking motor windings and other wiring. Series automates measurements from industrial systems The Fluke ScopeMeter 120 Series performs automated measurements on motor, switch and similar signals. The 123 has a 20 MHz bandwidth, while the 124 is a 40 MHz bandwidth instrument that performs more advanced measurements. The 125 is also a 40 MHz instrument but includes features for testing Field Bus and motors. All incorporate Fluke’s unique Connect-and-View to recognize signal patterns, and automatically set up correct triggering. The Fluke 125 includes a Power Adapter, test leads, 40 MHz probe, BP120MH battery (up to 7 hours operation) and i400s current clamp. The Fluke 125/S adds FlukeView software, carrying case and OC4USB cable. What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM 8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP 120 MH
    • User manual (CD-ROM)
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Fluke I400s AC Current Clamp
  • Feel free to contact us: Mobile: 0344 3813810 Two powerful tools in one The Fluke 1577 Insulation Multimeter combine a digital 1 kV insulation tester with a full-featured, true-rms digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks. For a greater capabilities purchase the Fluke 1587 Insulation Multimeter What’s Included:
    • Remote probe
    • Test leads
    • Alligator clips
    • Hard case
    • User documentation
  • The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:
    • Fluke 1621 Tester
    • 2 cable reels with wire (1-50m, 1-25m)
    • 3 earth ground stakes
    • 1 Test lead (red and black 2m)
    • 2 Alligator Clips
    • Batteries
    • Users manual
    • Hard carrying case
  • The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications. The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods.  ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety.  The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Testing Methods
    • 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
    • 4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
    • Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
    • Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
    The Fluke 1625 offers these advanced features:
    • Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
    • R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
    • Adjustable limits – for quick test result verification.
    Earth ground resistance and soil resistivity should be measured when:
    • Designing earth ground systems
    • Installing new ground system and electrical equipment
    • Periodically testing ground and lightning protection systems
    • Installing large electrical equipment such as transformers, switchgears, machines, etc.
    The Fluke 1625 is the stand-alone unit For a basic model see the Fluke 1623 What’s Included:
    • Fluke 1625 tester
    • 2 test leads
    • 2 alligator clips
    • 4 earth ground stakes
    • 3 cable reels with wire (2-25 m, 1-50 m)
    • selective/stakeless clamp set (one inducing, one sensing)
    • Batteries
    • Users manual
    • Rugged carrying case
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:
    • Load studies – verify electrical system capacity before adding loads
    • Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
    • Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
    • Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
    See the additional tabs above this content for features, specifications, virtual demos and other documents and list of what’s included with the Fluke 1735 three phaser power logger. What’s Included: • 4 flexible current probes (15 A/150 A/3000 A) • Power Log software • Voltage leads and clips • Color localization set • PC interface cable • International ac adapter (115/ 30 V, 50/60 Hz) • Printed English manual • Multi-language manual CD • Soft carry case
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:
    • Load studies – verify electrical system capacity before adding loads
    • Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
    • Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
    • Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
    See the additional tabs above this content for features, specifications, virtual demos and other documents and list of what’s included with the Fluke 1735 three phaser power logger. What’s Included: • 4 flexible current probes (15 A/150 A/3000 A) • Power Log software • Voltage leads and clips • Color localization set • PC interface cable • International ac adapter (115/ 30 V, 50/60 Hz) • Printed English manual • Multi-language manual CD • Soft carry case
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
    • V, A, W, VA, VAR
    • Power Factor
    • Energy
    • Flicker
    • Voltage
    • THD
    Apart from the Fluke 1743, the Fluke 1740 series includes two other power quality loggers: Fluke 1744 & Fluke 1745.
    • The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
    • The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
    The main difference between the 1743 and the other 2 models in the series, is the 1743 does not measure harmonics, unbalance or mains signaling. If you need to require these measurements, we recommend looking at the higher models. Software: The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. Applications:
    • Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
    • Quality of service compliance – Validate incoming power quality at the service entrance
    • Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
    • Load studies – Verify electrical system capacity before adding loads
    • Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
    What’s Included:
    • 4 Flexible probes 15/150/1500/3000 A with 2 m cable
    • CD-ROM with PQ Log software
    • RS232 interface cable and RS232-USB adapter
    • Test leads for voltages and power supply
    • 4 black dolphin clips
    • Color localization kit
    • Carrying bag
    • Test certificate with measurement values
    • Printed English manual
    • Multi-language manual CD
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1744 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
    • V, A, W, VA, VAR
    • Power Factor
    • Energy
    • Flicker
    • Voltage
    • THD
    • Harmonics, Interharmonics
    • Mains Signaling
    • Unbalance
    • Frequency
    Apart from the Fluke 1744, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1745.
    • The Fluke 1743 includes the same features as the Fluke 1743 but is not capable of measuring voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
    • The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
    The main difference between the 1744 and the other 2 models in the series, is the 1744 measure harmonics, unbalance or mains signaling but doesn’t have an LCD display and only has a 3 hour UPS. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. Applications:
    • Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
    • Quality of service compliance – Validate incoming power quality at the service entrance
    • Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
    • Load studies – Verify electrical system capacity before adding loads
    • Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
    What’s Included:
    • 4 Flexible probes 15/150/1500/3000 A with 2 m cable
    • CD-ROM with PQ Log software
    • RS232 interface cable and RS232-USB adapter
    • Test leads for voltages and power supply
    • 4 black dolphin clips
    • Color localization kit
    • Carrying bag
    • Test certificate with measurement values
    • Printed English manual
    • Multi-language manual CD
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 1745 Three Phase Power Quality Logger is an advanced IP50 power quality logger with real-time LCD and five hours UPS for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, this allows you to analyze power quality in detail and to correlate intermittent events, helping to identify the root cause of disturbances. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. The Fluke 1745 Three Phase Power Quality Logger can not only measure the common power parameters but it also measures voltage and current harmonics, interharmonics, mains signaling, unbalance, and frequency. Apart from the Fluke 1745, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1743.
    • The Fluke 1743 is capable of measuring most common power parameters but cannot measure voltage and current harmonics, interharmonics, mains signaling, unbalance or frequency.
    • The Fluke 1744 is more similar to the 1743 and is a better solution if you need to measure what the 1743 is incapable of measuring.
    Applications:
    • Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
    • Quality of service compliance – Validate incoming power quality at the service entrance
    • Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
    • Load studies – Verify electrical system capacity before adding loads
    • Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
    What’s Included:
    • 4 Flexible probes 15/150/1500/3000 A with 2 m cable
    • CD-ROM with PQ Log software
    • RS232 interface cable and RS232-USB adapter
    • Test leads for voltages and power supply
    • 4 black dolphin clips
    • Color localization kit
    • Carrying bag
    • Test certificate with measurement values
    • Printed English manual
    • Multi-language manual CD
Go to Top