Industrial Archives - buysolar.pk

View cart “Fluke 902 True-rms HVAC Clamp Meter” has been added to your cart.

Fluke 345 Power Quality Clamp Meter
Details
Fluke 8808A Digital Multimeter
Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications
5.5 digit resolution
Basic V dc accuracy of 0.01 %
Dual display
Dedicated dc leakage current measurement
2×4 ohms 4-wire measurement technique
Six dedicated buttons for fast access to instrument setups
Hi/Lo limit compare for Pass/Fail testing
The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do.Six setup buttons on the Fluke 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy!The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement.What’s Included:
Meter
TL71 test leads
Line cord
Spare line fuse
Statement of cal practices
WEEE information sheet
Warranty statement
Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
CD Rom with user manual (English)
Details
Fluke 1750 Three-Phase Power Quality Recorder
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time.Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries.Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment.The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired).Applications:Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctionsWhat’s Included:
1750 aquisition unit
PDA wireless “front panel interface” and charger power plug adapters
4 – 400A current probes (3140)
5 Test leads and clips
SD memory card
Fluke Power View and Fluke Power Analyze software
Power cord with international plug set
Ethernet cable
Color localization set
Printed Getting Started manual
Product CD with software and user manual PDF
Details
Fluke 1744 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810
The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues.The Fluke 1744 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
V, A, W, VA, VAR
Power Factor
Energy
Flicker
Voltage
THD
Harmonics, Interharmonics
Mains Signaling
Unbalance
Frequency
Apart from the Fluke 1744, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1745.
The Fluke 1743 includes the same features as the Fluke 1743 but is not capable of measuring voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
The main difference between the 1744 and the other 2 models in the series, is the 1744 measure harmonics, unbalance or mains signaling but doesn’t have an LCD display and only has a 3 hour UPS.The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard.Applications:
Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
Quality of service compliance – Validate incoming power quality at the service entrance
Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
Load studies – Verify electrical system capacity before adding loads
Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
What’s Included:
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD
Details
Fluke 1743 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues.The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
V, A, W, VA, VAR
Power Factor
Energy
Flicker
Voltage
THD
Apart from the Fluke 1743, the Fluke 1740 series includes two other power quality loggers: Fluke 1744 & Fluke 1745.
The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
The main difference between the 1743 and the other 2 models in the series, is the 1743 does not measure harmonics, unbalance or mains signaling. If you need to require these measurements, we recommend looking at the higher models.Software:The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard.Applications:
Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
Quality of service compliance – Validate incoming power quality at the service entrance
Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
Load studies – Verify electrical system capacity before adding loads
Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
What’s Included:
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD
Details
Delmhorst J-4
A tried and true solution for installers, woodworkers, and small shops, the J-4 is a user-friendly meter that you’ll pick up with ease, but never want to put down!
Details
Delmhorst RDM-3P
The RDM-3P is fully equipped for testing paperboard, corrugated stock, and paper tubes using its paper scale, 0-100 reference scale, and baled paper scale. Whatever the situation calls for, the RDM-3P delivers. Advanced storage and recall features make it easy to organize multiple jobs, or even download data to a PC via the optional linkage software. The paper production industry has a new ally in the reliable and precise RDM-3P!
Details
HP Textile-Yarn Package Hardness Tester
HP Textile Yarn Package Hardness Tester The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.
Details
YSL-2000HD Multi-function Yarn Speed & Length Meter
The CHECK-LINE YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device.It accurately measures the speed and length of yarns, and other filaments using a unique “wrapper” roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage.The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc.
Details
LMI / LMC Yarn Consumption Meter
Range:0-99,999 Inches or CentimetersThe Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder.LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measuredTwo LM types are offered:Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutionsModels LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter.Operation – LMI-S / LMC-SIn “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
Details
LMI / LMC Yarn Consumption Meter
Range:0-99,999 Inches or CentimetersThe Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder.LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measuredTwo LM types are offered:Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutionsModels LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter.Operation – LMI-S / LMC-SIn “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
Details
Area Weight Balance AR-300
Range:30000 g/m² or 300 gDesigned to determine the area weight g/m² or weight gr of knitted fabric or paper etc.2 Measuring modes: g/m² for fabric, paper or similar materials g to determine weight
Details
Fluke 381 Remote Display True-RMS 1000 A AC/DC Clamp Meter with iFlex
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Add to cart Details
Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex
Rs.0
Feel free to contact us: Mobile: 0344 3813810
True-RMS 1000A AC/DC
Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
CAT III/IV Safety ratings
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 375 True-RMS 600A AC/DC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
CAT IV 600
CAT III 1000 V
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 373 True-RMS 600 A AC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
True-RMS
600 A AC/DC
Works with iFlex flexible current probes
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Detachable Jaw clamp
Built in Flash/Torch light
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 902 True-rms HVAC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
CAT III Rating 600v
Low Pass Filter
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 360 Leakage Current Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement.Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety.The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components.. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor.The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability.Why leakage current testing?Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation.What’s Included:
Soft carrying pouch
Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese
Add to cart Details
Fluke 353 True-rms 2000 A Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings.Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements.Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.Applications:Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systemsWhat’s Included:Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty
Add to cart Details
Fluke 345 Power Quality Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Ideal for VSDs, UPS, lighting
AC/DC with low pass filter
Data logging records results
2 Years Warranty
The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs Load studies – Verify electrical system capacity before adding loadsWhat’s Included:345 Power Quality Clamp Meter Soft carrying case Power Log software Test leads Alligator clips Test probes USB cable International ac adapter / battery eliminator Printed English language user manual Multi-language manual CD
Add to cart Details
Fluke 321 Digital AC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Auto Power Off
Weight 230 g (8oz)
2 Years Warranty
Measure inrush motor starting current the way a circuit breaker sees it!Now everyone on your crew can have a Fluke Clamp Meter. This new smaller sized model offers accurate low current measurements, continuity test function and Fluke reliability.The Fluke 321 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. This affordable instrument combine a compact package with a strong feature set:New smaller size fits easily into tight places Precise measurements with 1.8% basic accuracy Resolution up to 0.01A and 0.1 V Measures AC current to 400 A Measures AC volts to 600 V Resistance measurement to 400 Ω Continuity for quick checking of shorts Automatic low battery indicator Display hold function Two year warrantyWhat’s Included:(2) AAA Alkaline batteries Instruction card Safety information sheet Soft carrying case Test leads
Add to cart Details
Fluke 1623 Basic GEO Earth Ground Tester Kit
Rs.0
The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications.The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test.Testing Methods
3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
The Fluke 1625 offers these advanced features:
Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
Adjustable limits – for quick test result verification.
Earth ground resistance and soil resistivity should be measured when:
Designing earth ground systems
Installing new ground system and electrical equipment
Periodically testing ground and lightning protection systems
Installing large electrical equipment such as transformers, switchgears, machines, etc.
The Fluke 1625 is the stand-alone unit For a basic model see the Fluke 1623What’s Included:
Fluke 1625 tester
2 test leads
2 alligator clips
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
selective/stakeless clamp set (one inducing, one sensing)
Batteries
Users manual
Rugged carrying case
Add to cart Details
Fluke 1621 Earth Ground Tester Kit
Rs.0
The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:
Fluke 1621 Tester
2 cable reels with wire (1-50m, 1-25m)
3 earth ground stakes
1 Test lead (red and black 2m)
2 Alligator Clips
Batteries
Users manual
Hard carrying case
Add to cart Details
Fluke 179/EDA2 Electronic’s Multimeter and Deluxe Accessory Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair.The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record.The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view.Check the features and specifications using the tabs above.Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes.Available as kits such as: Fluke 179/1AC-IIElectrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak™ Combo KitAlso available with no temperature asFluke 177or as Fluke 175Combo Kit includes:
Fluke 179 True-rms Digital Multimeter
Fluke 80BK K-type temperature probe
Fluke AC280 SureGrip Heavy Duty Hook Clips
Fluke TP910 Electronic Test Probes
Fluke TL224 SureGrip Silicone Test Leads resist heat
Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
What’s Included:
Fluke 179 True-rms Digital Multimeter
Fluke 80BK K-type temperature probe
Fluke AC280 SureGrip Heavy Duty Hook Clips
Fluke TL910 Electronic Test Probes
Fluke TL224 SureGrip Silicone Test Leads resist heat
Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:
Fluke 1621 Tester
2 cable reels with wire (1-50m, 1-25m)
3 earth ground stakes
1 Test lead (red and black 2m)
2 Alligator Clips
Batteries
Users manual
Hard carrying case
Add to cart Details
Fluke 87V/E2 Industrial Electrician’s Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench.The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment.With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals.The Fluke 87V/E2 Industrial Electrician Combo Kit makes troubleshooting more productive with standard meter hanging accessory for handsfree operation, soft case for protection and storage, 1.5 m heat resistant silicone test leads and more.Features for maximum productivity
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Large digit display with bright, two-level backlight
Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. See the Fluke 87V – Industrial True-rms Multimeter with Temperature Also available in an average responding multimeter, Fluke 83VWhat’s Included:
Fluke 87V Industrial Multimeter
Fluke AC220 retractable long reach alligator clips
Fluke C35 lightweight soft case to provide optimal protection and storage
Fluke TPAK ToolPak meter haning accessory to hold meter to steel surfaces
Fluke TL224 1.5 m silicone leads resist head
Fluke TP238 removable probes with 4 mm of exposed metal to use on industrial circuits
9V battery (installed)
Getting Started Manual
CD with detailed manual
Fluke 80BK K-type temperature probe
Add to cart Details
Fluke 88V/A Automotive Multimeter Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810
A complete automotive diagnostic package with everything you need in an automotive multimeterThe new Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty.The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.Combo Kit Includes: 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual.The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. What’s Included:
Fluke 88V Automotive Multimeter
Fluke TL224 Heat Resistant Silicone Test Leads
Fluke TP220 Removable Sharp Point Test Probes
Fluke AC285 Large Jaw Alligator Clips
Fluke TPAK Magnetic Hanger
Fluke 80BK Temperature Probe
Fluke RPM80 Inductive Pick-up
Automotive Backprobe Pins
Insulation Piercing Probe
Packaged in a durable carrying case (Fluke C800)
Add to cart Details
Fluke 116/62 HVAC Multimeter and IR Thermometer Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician’s Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.3-year product warranty on Fluke-116 DMM, 2-year warranty on Fluke-62 IR Thermometer and 1-year warranty on accessoriesWhat’s Included:
Fluke 116 HVAC Multimeter with Temperature and Microamps
Fluke 62 Infrared Thermometer
Fluke TL75 Hard Point Test Lead Set
Fluke TPak ToolPak Magnetic Meter Hanging Strap
NEW! Fluke C115 Deluxe carrying case with shoulder strap
Fluke 80BK Integrated Temperature Probe
Fluke 80AK Thermocouple Adapter
NEW! Fluke 80PK-11 Pipe Wrap Thermocouple
Add to cart Details
Fluke 117/322 Electricians Multimeter and Clamp Meter Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810
This combo kit pairs the new Fluke 117 DMM with a Fluke 322 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation.3 years warranty on Fluke 117 DMM, 2 years warranty on Fluke 322 Clamp meter and 1 year on accessories.What’s Included:
Fluke 117 True-rms Digital Multimeter with non-contact voltage detector
NEW! Fluke C115 Deluxe carrying case with shoulder strap
Fluke 322 Compact Clamp Meter
Fluke TL75 Hard Point Test Lead Set
Fluke TPAK ToolPak Magnetic Meter Hanging Kit
Add to cart Details
Fluke 189/FVF2 Kit Data Logging Multimeter and Software Combo Pack
Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 189 is the most advanced meter with features, precision and accuracy to troubleshoot industrial and electronic equipment in the field or on the bench.The Fluke 189 has a built-in data logger to record measurements unattended. Recorded data can be viewed on the 189 or transferred to a PC with optional FlukeView Forms software.
Built in data logger records reading and time to catch intermittent problems
Measure 20 A for up to 30 seconds, 10 A continuous
Temperature, capacitance, dB, frequency, pulse width and duty cycle to find more problems with one tool
Large bright white display with dual parameter
Isolated IR communication port to send data to a PC
Premium test leads (Fluke TL71) and alligator clips (Fluke AC72) included
New! USB data cable with FlukeView Forms
New! battery pack (Fluke BP189) extends battery life to over 400 hours
The Fluke 189 Data Logging Multimeter and Software Combo Pack provides a practical, affordable approach to achieve significantly improved maintenance performance. With the flexibility to monitor more than 20 different electrical functions plus temperature, it can help you increase your team’s productivity and reduce downtime by helping you find your problems faster.Flukeview Forms Software (included in Combo Pack) allows overlaying of data from six different meters or time periods to find cause-effect relationships or for predictive maintenance applications.Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600 V.Available in non-logging version as Fluke 187 or just get the multimeter on its own Fluke 189What’s Included:
Logging Multimeter (Fluke 189)
FlukeView® Forms Software (Fluke FVF-SC2)
USB Cable adapter (IR189USB)
Test Lead Set (Fluke TL71)
Alligator Clip Set (Fluke AC72)
Temperature Thermocouple (Fluke 80BK)
High Capacity Battery Pack (Fluke BP189)
Soft Carrying Case (Fluke C25)
Meter Hanging Kit (Fluke TPAK)
Add to cart Details
Fluke 287/FVF FlukeView Forms Combo Kit
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Maximize productivity with the combined Fluke 287 and FlukeView forms combo kit. Designed for today’s professionals involved in the R & D, maintenance, manufacture and design of electronic circuits or systems. With built-in data logger and TrendCapture (the meters on screen graphical display) cabability, the 287 helps you track down elusive, intermittent problems or monitor equipment with any of its functions. FlukeView Forms enables you to document, store, and analyze individual readings or series of measurements, overlay logged data to find cause and effect relationships, or turn your data into meaningful graphs and tables for a professional report. The 287/FVF combo kit gives you a practical and affordable approach to documenting circuit design performance. What’s Included:
Fluke-287 True-rms Electronic Logging Multimeter with TrendCapture
FlukeView Forms Software and cable
80BK-A Thermocouple Probe
CAT III 1000 V 10 A Modular test leads (red, black)
CAT III 1000 V 10 A Modular test probes (red, black)
CAT II 300 V 5 A Alligator Clips (red, black)
C280 Soft Case for meter protection and accessory storage
Add to cart Details
Fluke 2AC VoltAlert Voltage Detector
Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 2AC is the latest addition to the VoltAlert™ ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
Voltage detection from 90 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.
NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.
NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*
Category IV – 1000 V overvoltage rated product for best in class user protection
Integrated clip design, optimized for pocket storage
Powered by 2x AAA batteries (included)
Fluke ruggedness and reliability
Two-year warranty
Add to cart Details

Title