• Feel free to contact us: Mobile: 0344 3813810 Fluke 225C ScopeMeter is based on the 199C Color ScopeMeter. It includes all the key functionalty of that product but also includes the popular Bus Health Test feature of the Fluke 125 ScopeMeter. Bus Health Test offers powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus Health Test mode, the Fluke 225C automatically makes an analysis of the electrical signals passing through the bus, and compares the parameters to industry standard values for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality. Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behavior. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard. Because the Fluke 225C ScopeMeter is based on the Fluke 199C ScopeMeter, it also offers 2Gs/S and 200MHz bandwidth. The Fluke 225C is also available as a kit which includes software, communications cable and carry case – this product is called the Fluke 225C/003S.
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 125 Industrial ScopeMeter is a rugged, reliable solution for industrial troubleshooting and installation applications.  Integrated test tool, with oscilloscope, multimeter, and “paperless” recorder in one affordable, easy-to-use instrument. As the latest addition to the Fluke 120 Series ScopeMeters, the Fluke 125 has advanced features for installing and troubleshooting field buses and electrical machines. The ScopeMeter performs a bus health test on industrial buses, for example, which are rapidly becoming a headache for Service, Maintenance and Installation (SMI) engineers. The test quickly determines whether the bus is working and if not, helps to identify the cause. The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet. In addition, the instrument can test power input, sensor timing, motor windings, drive output timing and power measurements – thus eliminating the need for expensive, more specialized test equipment. The ScopeMeters are 600 V CAT III safety certified for machinery, instrumentation, control and power systems. The new Fluke 125 has all the features of the successful Fluke 123 and Fluke 124 ScopeMeters and, in addition to the bus health test, it also carries out effective (Vpwm) voltage measurements of motor drive output, and has 0.01 ohm resolution on the 50 Ohms range for testing motor windings. User-named data setups make for easy use.  The 125 extends the 120 series by adding;  Industrial networks bus health testing and Measure harmonics and power, VA, VAR, W, and PF Simple good/bad readout for Field Bus parameters The bus health tests of the Fluke 125 ScopeMeter find defects like bad or missing terminators, bad cable splits, missing links, incorrect line loading, line interrupts, short circuit conditions and reflections. The instrument continuously acquires the bus signal and compares parameters to official specifications. It displays bus speed and measures signal quality with ‘good’ or ‘bad’ indications for parameters like rise- and fall-time, amplitude, bias level, pulse width and distortion. The instrument checks at the hardware (not protocol) level. An eye-pattern mode allows for a visual check of signal integrity. Harmonic analysis and power consumption Extended Harmonics Analysis of mains waveforms reaches up to the 33rd harmonic. That includes the important 3rd and 5th harmonics, which may be the cause of overheating in neutral wire or motor, as well as flat-topping of the mains voltage from non-linear loads like SMPS units. The wide frequency range covers railway (16.66 Hz) and airplane systems (400 Hz) applications. Power measurements cover single-phase and balanced-3-phase, 3-wire systems (Watt, VA, VAR and Power Factor). Unlike PQ analyzers, the instrument is not restricted to 50/60 Hz, and can measure power at the output of motor drives and frequency converters. The Vpwm measurement capability shows the output voltage of motor drives exactly as the motor perceives it. For electrical and combustion engines, the 125 can indicate revolutions-per-minute (rpm), and can be set up for 1 or 2 rotations per pulse, or 1 rotation per 2 or 4 pulses. A 50-ohm resistance range brings excellent 0.01-ohm resolution for checking motor windings and other wiring. Series automates measurements from industrial systems The Fluke ScopeMeter 120 Series performs automated measurements on motor, switch and similar signals. The 123 has a 20 MHz bandwidth, while the 124 is a 40 MHz bandwidth instrument that performs more advanced measurements. The 125 is also a 40 MHz instrument but includes features for testing Field Bus and motors. All incorporate Fluke’s unique Connect-and-View to recognize signal patterns, and automatically set up correct triggering. The Fluke 125 includes a Power Adapter, test leads, 40 MHz probe, BP120MH battery (up to 7 hours operation) and i400s current clamp. The Fluke 125/S adds FlukeView software, carrying case and OC4USB cable. What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM 8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP 120 MH
    • User manual (CD-ROM)
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Fluke I400s AC Current Clamp
  • Feel free to contact us: Mobile: 0344 3813810
    Three-in-one simplicity for fast answers wherever you work. In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The Fluke 124 ScopeMeter meet today’s need of simultaneously measuring and checking waveforms. For industrial, electronic or electro mechanical applications, the compact Fluke 124 Industrial ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. It features 40MHz bandwidth, Connect-and-View  triggering automatically displays stable waveforms of virtually any signal and a dual DMM and a paperless recorder to get virtually any job done. It is a truly integrated test tool in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.
    • Dual-input 40 MHz digital oscilloscope.
    • Two 5,000-count true-rms digital multimeters.
    • 20 save setups and screens
    • Cursor measurements
    • A dual-input TrendPlot recorder.
    • Connect-and-View trigger simplicity for hands-off operation.
    • Shielded test leads for oscilloscope, resistance, continuity and capacitance measurements.
    • Up to seven hours battery operation with standard battery
    • CAT III 600 V safety certified.
    • Optically isolated RS-232 interface.
    • Rugged compact case.
    See the Fluke 124 Color ScopeMeter Other models are the Fluke 123; Fluke 123S What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP120 MH
    • User manual (CD-ROM)
    Also comes with the SCC120 kit which includes:
    • Fluke C190 Hard Carrying Case;
    • Fluke OC4USB Optically isolated USB-Cable;
    • Fluke SW90W/034EFG FlukeView ® Software for Windows. English, French and German language
  • Feel free to contact us: Mobile: 0344 3813810 The new Fluke 190-102 Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters. The Fluke 190-102/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s and a 400ps resolution to capture noise and other disturbances.

    Applications

    • Automation: PLC’s, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
    • Medical Imaging: XRay, MRI, ultrasound imaging equipment
    • Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
    • A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID

    Fluke 190 Series II ScopeMeters

    The new 2-channel Fluke 190 series of portable oscilloscopes are designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating. Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments. The new Fluke 190 series II now includes new features for troubleshooting today’s industrial power electronic systems and enhancements that will improve usability and overall satisfaction.

    New Features and Functions for Industrial Equipment Maintenance Applications

    • IEC 61010 1000V CAT III / 600V CAT IV Safety rating
    • 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
    • 8ns Glitch detect
    • 10,000 sample deep memory per channel for displaying high resolution waveform details
    • 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
    • Live Zoom with full resolution
    Customer Driven Enhancements
    • Hi-capacity Li-ion battery with up to four hours of operation
    • Battery access door to easily swap out batteries for extended operation
    • Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
    • Security slot to lock down instrument using standard Kensignton PC lock
    • Screen insert for standard camera mounting accessories
    Plus all the Key Features and Benefits of the existing ScopeMeter 190 Series
    • Up to 100 MHz bandwidth, 1.25 GS/s real time sample rate up to 400 pico seconds resolution
    • Built-in multimeter
    • Connect and View to easily trigger on and display even complex waveforms
    • TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
    • Reply Last 100 Screen, to go back in time to see waveform anomalies
    • Environmentally tested to meet IP51 dusty and drip proof rating and withstand 3G vibration or 30g shock

    Other Fluke 190 Series II (2 Channel) models:

    • Fluke 190-102/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    • Fluke 190-062/AM – This is the 60MHz series model
    • Fluke 190-062/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    • Fluke 190-202/AM – This is the 200MHz series model
    • Fluke 190-202/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    What’s Included:
    • Fluke BC190 Power adapter
    • Fluke BP290 Li-ion battery pack
    • VPS410-R probe red
    • VPS410-B probe blue
    • USB cable A – B (mini)
    • Hanging strap
    • Handstrap affixed to instrument (user selectable for left or right handed use)
    • CD user manual with FlukeView ScopeMeter software demo version
    • Statement of calibration practice
  • Feel free to contact us: Mobile: 0344 3813810
    Whether you are performing routine maintenance and calibration, or troubleshooting the hardest to solve problems like intermittent failures or sources of unwanted noise, the Fluke 192C Color Scopemeter has all the tools needed to get the job done. With 60 MHz bandwidth, up to 0.5 GS/s real-time sampling rate, 27,500 points memory for high resolution waveform per input they’re ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument. This model has a high resolution color display that has a fast update rate, waveform pass/fail testing and a digital persistence mode – making the analysis of complex and dynamic signals that much easier.
    • Dual-input – 60 MHz bandwidth
    • Up to 0.5 GS/s real-time sampling per input
    • High waveform resolution of 3,000 datapoints per channel
    • Connect-and-View™ automatic triggering and a full range of manual trigger modes
    • Fast display update rate for seeing dynamic behavior instantaneously
    • Automatic capture and replay of 100 screens
    • 27,500 points per input record length using ScopeRecord™ mode
    • TrendPlot™ paperless chart recorder for trend analysis up to 22 days
    • Up to 1000 V independently floating isolated inputs
    • Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
    • Vpwm function for motor drive and frequency inverter applications.
    • 1000 V CAT II and 600 V CAT III safety certified
    • Four hours rechargeable Ni-MH battery pack
    See the Fluke 192C Color ScopeMeter For advanced capabilities see the Fluke 199C Color ScopeMeter Other models are the Fluke 196C. What’s Included:
    • Fluke BC190 Battery Charger/Line Voltage adapter
    • Fluke BP190 NiMH Battery Pack
    • Getting started booklet
    • User manual (CD-ROM)
    • Fluke TL75 Hard Point Test Lead Set
    • Fluke VPS200-G Voltage Probe (200 MHz, 10:1), Grey
    • Fluke VPS200-R Voltage Probe (200 MHz, 10:1), Red
    Also comes with the SCC190 kit which includes:
    • Fluke C190 Hard Carrying Case;
    • Fluke OC4USB Optically isolated USB-Cable;
    • Fluke SW90W/034EFG FlukeView ® Software for Windows. English, French and German language
Go to Top