4.00mm Tin Copper with XLPE and EVA Coatings SOLAR CABLE - 99.99% Pure Copper
Feel free to contact us: Mobile: 0344 3813810- Feel free to contact us: Mobile: 0344 3813810 The Extech 68 Adjustable Infrared Thermometer is used by professional technicians who demand precision and accuracy for their maintenance diagnostics. The durable infrared thermometer features optical resolution, accuracy and extended temperature ranges. With a laser guided sighting system and an expanded measurement range up to 1400ºF (760ºC), this is the infrared thermometer of choice for daily MRO tasks. For special surfaces such as concrete tiles or lead, the infrared thermometer offers adjustable emissivity.
Feel free to contact us: Mobile: 0344 3813810 This Milwaukee infrared laser thermometer provides a safe and accurate way to measure surface temperature for a wide variety of applications and features a 12 to 1 distance to spot ratio and a K-Type thermocouple for contact temperature. The instrument is equipped with a slide rail system that enables you to add proprietary accessories and on-board contact measurement jacks help to improve accuracy. The unit is designed with heavy duty ergonomic pistol grip and rugged over-molding for increased durability.- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 Fluke 225C ScopeMeter is based on the 199C Color ScopeMeter. It includes all the key functionalty of that product but also includes the popular Bus Health Test feature of the Fluke 125 ScopeMeter. Bus Health Test offers powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus Health Test mode, the Fluke 225C automatically makes an analysis of the electrical signals passing through the bus, and compares the parameters to industry standard values for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality.Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behavior. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard.Because the Fluke 225C ScopeMeter is based on the Fluke 199C ScopeMeter, it also offers 2Gs/S and 200MHz bandwidth.The Fluke 225C is also available as a kit which includes software, communications cable and carry case – this product is called the Fluke 225C/003S.
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 The new Fluke 190-102 Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters.The Fluke 190-102/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s and a 400ps resolution to capture noise and other disturbances.
Applications
- Automation: PLC’s, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
- Medical Imaging: XRay, MRI, ultrasound imaging equipment
- Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
- A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID
Fluke 190 Series II ScopeMeters
The new 2-channel Fluke 190 series of portable oscilloscopes are designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating.Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments.The new Fluke 190 series II now includes new features for troubleshooting today’s industrial power electronic systems and enhancements that will improve usability and overall satisfaction.New Features and Functions for Industrial Equipment Maintenance Applications
- IEC 61010 1000V CAT III / 600V CAT IV Safety rating
- 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
- 8ns Glitch detect
- 10,000 sample deep memory per channel for displaying high resolution waveform details
- 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
- Live Zoom with full resolution
- Hi-capacity Li-ion battery with up to four hours of operation
- Battery access door to easily swap out batteries for extended operation
- Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
- Security slot to lock down instrument using standard Kensignton PC lock
- Screen insert for standard camera mounting accessories
- Up to 100 MHz bandwidth, 1.25 GS/s real time sample rate up to 400 pico seconds resolution
- Built-in multimeter
- Connect and View to easily trigger on and display even complex waveforms
- TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
- Reply Last 100 Screen, to go back in time to see waveform anomalies
- Environmentally tested to meet IP51 dusty and drip proof rating and withstand 3G vibration or 30g shock
Other Fluke 190 Series II (2 Channel) models:
- Fluke 190-102/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-062/AM – This is the 60MHz series model
- Fluke 190-062/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-202/AM – This is the 200MHz series model
- Fluke 190-202/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke BC190 Power adapter
- Fluke BP290 Li-ion battery pack
- VPS410-R probe red
- VPS410-B probe blue
- USB cable A – B (mini)
- Hanging strap
- Handstrap affixed to instrument (user selectable for left or right handed use)
- CD user manual with FlukeView ScopeMeter software demo version
- Statement of calibration practice
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 Power quality analysis plus a scope and a meter!!The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance.The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures.Features include:
- New! NiMH Battery provides extended operating time of 6.5 hours
- Combines the most useful capabilities of a power quality analyzer, multimeter and scope
- Simulates 3-phase power (assuming balanced loads) from a single-phase measurement
- Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
- Monitoring functions help track intermittent problems and power system performance
- Menus use familiar electrical terminology
- New! Toggle through the most commonly used power quality modes with a single keystroke
- Records two selectable parameters for up to 16 days
- New! 20 measurement memories to save/recall screens and data with cursor readings
- FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
- Measures resistance, diode voltage drop, continuity, and capacitance
- Users / applications manual and power quality video to help answer tough questions
- Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable
- 3 year warranty on the Fluke 43B, 1 year on accessories
- C120 Hard Case
- TP1 Flat-tipped Slim-Reach™ Test Probes
- TP4 4 mm Round Slim-Reach™ Test Probes
- i400s AC Current Clamp
- OC4USB Optically Isolated USB Interface Adapter
- BP120MH Rechargeable NiMH Battery Pack (installed)
- PM 8907 Line Voltage Adapter/Battery Charger
- SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
- Shielded Banana-to-BNC Adapter
- Users Manual / Application Guide
- Power Quality CD-ROM
- Feel free to contact us: Mobile: 0344 3813810 he Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:
- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging.The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more.With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues.Set up the 1735 in seconds, with the included flexible current probes and color display.The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application.The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button.Applications:
- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
- Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
- Feel free to contact us: Mobile: 0344 3813810
- Feel free to contact us: Mobile: 0344 3813810 The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:
- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
- Feel free to contact us: Mobile: 0344 3813810 Pinpoint power problems faster, safer and in greater detail!The Fluke 434 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues.The Fluke 434 offers unique features like AutoTrend, which records everything on the screen automatically, and System-Monitor, a quick diagnosis of system performance against user defined limits and Logger Function (optional functionality can be added with upgrade kit Fluke 434/LOG). Together the features help to quickly diagnose problems and build benchmarks for predictive maintenance.The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality.Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 434 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes.Full measurement capability and the highest safety rating With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 434 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells.Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (8 MB) memory stores up to 50 screens and up to 10 measurements each comprising 32 parameters – including setups and trend data – recorded for more than a year, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports.If any of these situations apply to you, then this tool is for you:
- Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
- Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
- Quality of Service Compliance – Validate incoming power quality at the service entrance
- Long-term Analysis – Uncover hard-to-find or intermittent issues
- Load Studies – Verify electrical system capacity before adding loads
- Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving devices
- Fluke C430 Hard carrying case
- Fluke i400s 4 current clamps, CAT IV 600 V
- Fluke TLS430 5 Test leads, 4 black, 1 green
- Fluke BC430 Battery Charger Eliminator
- FlukeView Software SW43W
- Fluke OC4USB Optical Cable for USB
- Fluke WC100 Color localization set
- Getting Started printed
- User Manual (CD-ROM)
Call Us Today! (+92 30 77 381 381) | buysolarpakistan@gmail.com
