• 4.00mm Tin Copper with XLPE and EVA Coatings SOLAR CABLE - 99.99% Pure Copper

    Features

    - Reliable - Outdoor durable - High resistance against UV, Ozone, and hydrolyzation. - High-temperature resistance, materials will not melt or flow. - Flame and Fire retardant - Flexibility under cold conditions - Easy Installation - Weather Resistant - Resistant to mineral oils, acids, and alkalis - Impact resistant - Abrasion-resistant - Applicable to all common connectors.
  • Range:30000 g/m² or 300 g Designed to determine the area weight g/m² or weight gr of knitted fabric or paper etc. 2 Measuring modes: g/m² for fabric, paper or similar materials g to determine weight
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • The CHECK-LINE YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, and other filaments using a unique “wrapper” roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc.
  • HP Textile Yarn Package Hardness Tester The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.
  • The RDM-3P is fully equipped for testing paperboard, corrugated stock, and paper tubes using its paper scale, 0-100 reference scale, and baled paper scale. Whatever the situation calls for, the RDM-3P delivers. Advanced storage and recall features make it easy to organize multiple jobs, or even download data to a PC via the optional linkage software. The paper production industry has a new ally in the reliable and precise RDM-3P!
  • The P-2000 is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The P-2000 is especially useful for testing paperboard, corrugated stock, and paper tubes. It is ideal for plant superintendents, inspectors, buyers, and salespeople.
  • Meeting the restoration contractor’s demand for detailed, accurate, and accessible information. The Navigator Pro moisture meter features advanced job definition that organizes readings of the floor, wall, and ceiling in affected rooms. Stored readings can be downloaded to a spreadsheet on your PC, providing clear, complete documentation of every job. With features you can’t find anywhere else, plus Delmhorst’s renowned quality and service, the Navigator Pro will guide you from wet to dry! Navigator Pro can be used to check moisture in drywall, insulation, wood, concrete, and plaster. It traces leaks to find exterior moisture and dry rot.
  • Given the challenging conditions of building inspection, installation, and drying jobs, it pays to have an easy-to-use moisture meter that you can depend on. The easy-to-use 2-in-1 TechCheck PLUS was designed with simplicity in mind and helps to make even the most demanding job simple. The newly updated TechCheck PLUS has all the great features you’ve come to expect, along with some new ones.
  • Delmhorst is proud to introduce the HT-4000, a stand-alone thermo-hygrometer for flooring installers and restoration contractors alike. The HT-4000 has the same fast acclimating RH/T sensor found in our popular Total Check and Navigator Pro 3-in-1 moisture meters. For contractors who prefer having separate meters to one combination meter, the HT-4000 is the perfect solution. The meter’s sensor is also detachable, making the HT-4000 ideal for testing a concrete slab according to the ASTM F2170 standard.
  • The KS-D1 Digital Soil Moisture Tester, used with the GB-1 Gypsum Sensor Blocks, make up a valuable system to monitor the soil moisture available to the plants. This system eliminates guesswork, so that irrigation can be effectively scheduled, according to plants’ requirements.
  • The RDM-3 is a handheld moisture meter packed with features, and is perfect for the lumber and woodworking industries. The RDM-3 is ideal for anyone who needs to collect and analyze key statistical information.
  • For flooring contractors, woodworkers, furniture manufacturers, QC inspectors and small mills, the J-2000 helps to keep up with ever-changing job conditions. With built-in wood species correction and temperature correction, along with storage and informative reading statistics the J-2000 is an extremely versatile tool at a great value.
  • A tried and true solution for installers, woodworkers, and small shops, the J-4 is a user-friendly meter that you’ll pick up with ease, but never want to put down!
  • Whether you’re experienced or just starting out, you can’t go wrong with the J-Lite! With J-Lite’s unique LED display, you’ll be in the know no matter where the job takes you. A great all-around tool for any situation!
  • Multi-parameters portable device : Pressure, air velocity, airflow, hygrometry, temperature, air quality, tachometry. Memory : up to 12 000 measurement points Dataloger software for data recording and processing (option). Supplied with calibration certificate and alu transport case.
  • unctions : Relative humidity, dew point and temperature. Measuring range Humidity : 5 to 95 %HR Temperature : -20 to +80°C Dew point : -40 to +80°Ctd Supplied with hygrometrie probe, transport case and calibration certificat
  • Capacitive sensing element for relative humidity measurement Inside the probes, a capacitive polymer layer reacts with the humidity present between two metal layers which cover a glass substract. Water absorption is a function of relative humidity of the surrounding environment, and modifies the dielectric constant. The measured signal is directly proportionnal to the relative humidity and is dependent on the atmospheric pressure.
  • Functions : Relative humidity, dew point and temperature. 8, 000 measuring points DATALOGGER software (option)
  • KIMO has designed and manufactured the flow cones as an essential instrument for measuring direct air flows in ventilators and HVAC systems. These instruments can be associated with the hot wire and vane Ø 100 mm anemometers from Class 100, 200 and 300 portable instruments. Many models are available according to the flow, the dimensions of the diffusers and the probe used.
  • Functions : Velocity, airflow, temperature. 8, 000 measuring points DATALOGGER software (option) Anemometer
    • Ø 70 mm vane : from 0,3 to 35 m/s
    • Ø 100 mm : from 0,25 to 35 m/s
    • Ø 14 mm : from 0,8 to 25 m/s
    • hotwire : from 0,15 to 30 m/s
  • Anritsu’s S311D Site Master is the latest addition to the successful Site Master Cable & Antenna analyzer. It builds upon Anritsu’s expertise in developing accurate, portable, rugged, and easy-to-use field instrument aimed at simplifying life for field users. The Site Master is the ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers testing the RF performance of P25 and TETRA radios in the VHF/UHF, 400 MHz, 700 MHz, and 800 MHz bands. The high performance 25 MHz to 1600 MHz cable & antenna analyzer can be used to sweep cables and antenna systems. Option 2 extends the lower frequency range to 2 MHz. Frequency Domain Reflectometry (FDR) based Return Loss and VSWR measurements are used to characterize antenna systems. The Distance-To-Fault (DTF) measurement can easily spot poor connections, contamination, damaged cables, and water penetration. The fast sweep speed results in significant time savings for the technicians. FlexCal broadband calibration allows troubleshooting cable and antenna systems without multiple calibrations and calibration setups. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. The High Accuracy Power Meter provides true RMS measurements from 50 MHz to 6 GHz. It is the ideal solution for making accurate measurements of both CW and modulated signals. The S311D Site Master also includes optional channelized power meter, broadband power monitor, and GPS receiver. The S311D model Site Master Handheld Cable and Antenna analyzer includes data analysis software, soft carrying case, rechargeable/field-replaceable battery, AC/DC power supply, 12V automobile cigarette lighter adapter and users guide.
  • A complete solution for wireless network testing, troubleshooting, and optimization, including LTE drive testing Mobile operators must troubleshoot and optimize the performance of their wireless networks from rollout through expansion to ensure availability and quality. For this, they need a wireless drive test optimization and troubleshooting tool that can continuously evolve to support today’s and tomorrow’s wireless network technologies while keeping total cost of ownership (TCO) down. TEMS Investigation is the industry-leading tool for wireless network troubleshooting, verification, optimization, and maintenance of wireless networks. Offering data collection, real-time analysis, and post-processing all in one, TEMS Investigation is a comprehensive solution for all of a network operator’s daily wireless network optimization tasks. This solution eliminates the need for multiple tools, reducing costs and saving time and effort for operations staff.TI Illustration TEMS Investigation supports all major technologies – GSM/GPRS, EDGE, WCDMA, HSPA/HSPA+, LTE (including TD-LTE), CDMA, EVDO, WiMAX and TD-SCDMA – and major vendor handsets, making it the ideal solution both for rolling out new networks and for ensuring seamless integration with existing networks. Using TEMS Investigation, operators can achieve improved voice quality, increased accessibility, improved retainability, and better service performance. A wide range of powerful, easy-to-use features makes TEMS Investigation essential throughout the network’s life cycle. Use TEMS Investigation to:
    • Tune and optimize networks
    • Perform fault-tracing and wireless network troubleshooting
    • Verify true terminal behavior with phone based measurements
    • Verify cell coverage and capacity, as well as accessibility, retainability, and integrity
    • Perform indoor, pedestrian, and outdoor wireless network measurements
  • Feel free to contact us: Mobile: 0344 3813810
    • Dual laser for accurate targeting with fast (0.15s) response time
    • At 30″ (76.2cm) distance two laser points converge to 1″ target spot
    • Temperature range: -58 to 1832°F (-50 to 1000°C)
    • 0.10 to 1.00 adjustable emissivity increases measurement accuracy for different surface
    • 0.1°F/°C max resolution
  • Feel free to contact us: Mobile: 0344 3813810 The Extech 68 Adjustable Infrared Thermometer is used by professional technicians who demand precision and accuracy for their maintenance diagnostics. The durable infrared thermometer features optical resolution, accuracy and extended temperature ranges. With a laser guided sighting system and an expanded measurement range up to 1400ºF (760ºC), this is the infrared thermometer of choice for daily MRO tasks. For special surfaces such as concrete tiles or lead, the infrared thermometer offers adjustable emissivity.
  • Feel free to contact us: Mobile: 0344 3813810 This Milwaukee infrared laser thermometer provides a safe and accurate way to measure surface temperature for a wide variety of applications and features a 12 to 1 distance to spot ratio and a K-Type thermocouple for contact temperature. The instrument is equipped with a slide rail system that enables you to add proprietary accessories and on-board contact measurement jacks help to improve accuracy. The unit is designed with heavy duty ergonomic pistol grip and rugged over-molding for increased durability.
  • Feel free to contact us: Mobile: 0344 3813810
    The Hygro Thermometer and Infrared Thermometer is equipped with a Laser Pointer that enables you to better pinpoint a precise location for more accurate readings of temperature and humidity. Readings are quickly displayed simultaneously on a very large, backlit LCD, and the tool allows you to switch between IR temperature reading displayed and switchable *F/C scales. The Hygro Thermometer and Infrared Thermometer features a remote humidity sensor with a 39″ coiled cable, auto power off function, low batter and over-range indicators, and many more useful features. The The Hygro Thermometer and Infrared Thermometer comes complete with a convenient carrying case, handy built-in stand and protective holster, a probe, and a 9V battery.
  • Feel free to contact us: Mobile: 0344 3813810 Fluke 225C ScopeMeter is based on the 199C Color ScopeMeter. It includes all the key functionalty of that product but also includes the popular Bus Health Test feature of the Fluke 125 ScopeMeter. Bus Health Test offers powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus Health Test mode, the Fluke 225C automatically makes an analysis of the electrical signals passing through the bus, and compares the parameters to industry standard values for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality. Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behavior. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard. Because the Fluke 225C ScopeMeter is based on the Fluke 199C ScopeMeter, it also offers 2Gs/S and 200MHz bandwidth. The Fluke 225C is also available as a kit which includes software, communications cable and carry case – this product is called the Fluke 225C/003S.
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 125 Industrial ScopeMeter is a rugged, reliable solution for industrial troubleshooting and installation applications.  Integrated test tool, with oscilloscope, multimeter, and “paperless” recorder in one affordable, easy-to-use instrument. As the latest addition to the Fluke 120 Series ScopeMeters, the Fluke 125 has advanced features for installing and troubleshooting field buses and electrical machines. The ScopeMeter performs a bus health test on industrial buses, for example, which are rapidly becoming a headache for Service, Maintenance and Installation (SMI) engineers. The test quickly determines whether the bus is working and if not, helps to identify the cause. The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet. In addition, the instrument can test power input, sensor timing, motor windings, drive output timing and power measurements – thus eliminating the need for expensive, more specialized test equipment. The ScopeMeters are 600 V CAT III safety certified for machinery, instrumentation, control and power systems. The new Fluke 125 has all the features of the successful Fluke 123 and Fluke 124 ScopeMeters and, in addition to the bus health test, it also carries out effective (Vpwm) voltage measurements of motor drive output, and has 0.01 ohm resolution on the 50 Ohms range for testing motor windings. User-named data setups make for easy use.  The 125 extends the 120 series by adding;  Industrial networks bus health testing and Measure harmonics and power, VA, VAR, W, and PF Simple good/bad readout for Field Bus parameters The bus health tests of the Fluke 125 ScopeMeter find defects like bad or missing terminators, bad cable splits, missing links, incorrect line loading, line interrupts, short circuit conditions and reflections. The instrument continuously acquires the bus signal and compares parameters to official specifications. It displays bus speed and measures signal quality with ‘good’ or ‘bad’ indications for parameters like rise- and fall-time, amplitude, bias level, pulse width and distortion. The instrument checks at the hardware (not protocol) level. An eye-pattern mode allows for a visual check of signal integrity. Harmonic analysis and power consumption Extended Harmonics Analysis of mains waveforms reaches up to the 33rd harmonic. That includes the important 3rd and 5th harmonics, which may be the cause of overheating in neutral wire or motor, as well as flat-topping of the mains voltage from non-linear loads like SMPS units. The wide frequency range covers railway (16.66 Hz) and airplane systems (400 Hz) applications. Power measurements cover single-phase and balanced-3-phase, 3-wire systems (Watt, VA, VAR and Power Factor). Unlike PQ analyzers, the instrument is not restricted to 50/60 Hz, and can measure power at the output of motor drives and frequency converters. The Vpwm measurement capability shows the output voltage of motor drives exactly as the motor perceives it. For electrical and combustion engines, the 125 can indicate revolutions-per-minute (rpm), and can be set up for 1 or 2 rotations per pulse, or 1 rotation per 2 or 4 pulses. A 50-ohm resistance range brings excellent 0.01-ohm resolution for checking motor windings and other wiring. Series automates measurements from industrial systems The Fluke ScopeMeter 120 Series performs automated measurements on motor, switch and similar signals. The 123 has a 20 MHz bandwidth, while the 124 is a 40 MHz bandwidth instrument that performs more advanced measurements. The 125 is also a 40 MHz instrument but includes features for testing Field Bus and motors. All incorporate Fluke’s unique Connect-and-View to recognize signal patterns, and automatically set up correct triggering. The Fluke 125 includes a Power Adapter, test leads, 40 MHz probe, BP120MH battery (up to 7 hours operation) and i400s current clamp. The Fluke 125/S adds FlukeView software, carrying case and OC4USB cable. What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM 8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP 120 MH
    • User manual (CD-ROM)
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Fluke I400s AC Current Clamp
  • Feel free to contact us: Mobile: 0344 3813810
    Three-in-one simplicity for fast answers wherever you work. In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The Fluke 124 ScopeMeter meet today’s need of simultaneously measuring and checking waveforms. For industrial, electronic or electro mechanical applications, the compact Fluke 124 Industrial ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. It features 40MHz bandwidth, Connect-and-View  triggering automatically displays stable waveforms of virtually any signal and a dual DMM and a paperless recorder to get virtually any job done. It is a truly integrated test tool in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.
    • Dual-input 40 MHz digital oscilloscope.
    • Two 5,000-count true-rms digital multimeters.
    • 20 save setups and screens
    • Cursor measurements
    • A dual-input TrendPlot recorder.
    • Connect-and-View trigger simplicity for hands-off operation.
    • Shielded test leads for oscilloscope, resistance, continuity and capacitance measurements.
    • Up to seven hours battery operation with standard battery
    • CAT III 600 V safety certified.
    • Optically isolated RS-232 interface.
    • Rugged compact case.
    See the Fluke 124 Color ScopeMeter Other models are the Fluke 123; Fluke 123S What’s Included:
    • Fluke AC120 Alligator clips
    • Fluke BB120 Shielded BNC adapter
    • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
    • Getting started booklet
    • Fluke HC120 Hook Clips
    • Fluke PM8907 Battery Charger/Line Voltage Adapter
    • Fluke STL120 Shielded Test Lead Set
    • Fluke BP120 MH
    • User manual (CD-ROM)
    Also comes with the SCC120 kit which includes:
    • Fluke C190 Hard Carrying Case;
    • Fluke OC4USB Optically isolated USB-Cable;
    • Fluke SW90W/034EFG FlukeView ® Software for Windows. English, French and German language
  • Feel free to contact us: Mobile: 0344 3813810 The new Fluke 190-102 Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters. The Fluke 190-102/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s and a 400ps resolution to capture noise and other disturbances.

    Applications

    • Automation: PLC’s, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
    • Medical Imaging: XRay, MRI, ultrasound imaging equipment
    • Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
    • A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID

    Fluke 190 Series II ScopeMeters

    The new 2-channel Fluke 190 series of portable oscilloscopes are designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating. Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments. The new Fluke 190 series II now includes new features for troubleshooting today’s industrial power electronic systems and enhancements that will improve usability and overall satisfaction.

    New Features and Functions for Industrial Equipment Maintenance Applications

    • IEC 61010 1000V CAT III / 600V CAT IV Safety rating
    • 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
    • 8ns Glitch detect
    • 10,000 sample deep memory per channel for displaying high resolution waveform details
    • 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
    • Live Zoom with full resolution
    Customer Driven Enhancements
    • Hi-capacity Li-ion battery with up to four hours of operation
    • Battery access door to easily swap out batteries for extended operation
    • Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
    • Security slot to lock down instrument using standard Kensignton PC lock
    • Screen insert for standard camera mounting accessories
    Plus all the Key Features and Benefits of the existing ScopeMeter 190 Series
    • Up to 100 MHz bandwidth, 1.25 GS/s real time sample rate up to 400 pico seconds resolution
    • Built-in multimeter
    • Connect and View to easily trigger on and display even complex waveforms
    • TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
    • Reply Last 100 Screen, to go back in time to see waveform anomalies
    • Environmentally tested to meet IP51 dusty and drip proof rating and withstand 3G vibration or 30g shock

    Other Fluke 190 Series II (2 Channel) models:

    • Fluke 190-102/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    • Fluke 190-062/AM – This is the 60MHz series model
    • Fluke 190-062/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    • Fluke 190-202/AM – This is the 200MHz series model
    • Fluke 190-202/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
    What’s Included:
    • Fluke BC190 Power adapter
    • Fluke BP290 Li-ion battery pack
    • VPS410-R probe red
    • VPS410-B probe blue
    • USB cable A – B (mini)
    • Hanging strap
    • Handstrap affixed to instrument (user selectable for left or right handed use)
    • CD user manual with FlukeView ScopeMeter software demo version
    • Statement of calibration practice
Go to Top