• The CHECK-LINE YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, and other filaments using a unique “wrapper” roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc.
  • A complete solution for wireless network testing, troubleshooting, and optimization, including LTE drive testing Mobile operators must troubleshoot and optimize the performance of their wireless networks from rollout through expansion to ensure availability and quality. For this, they need a wireless drive test optimization and troubleshooting tool that can continuously evolve to support today’s and tomorrow’s wireless network technologies while keeping total cost of ownership (TCO) down. TEMS Investigation is the industry-leading tool for wireless network troubleshooting, verification, optimization, and maintenance of wireless networks. Offering data collection, real-time analysis, and post-processing all in one, TEMS Investigation is a comprehensive solution for all of a network operator’s daily wireless network optimization tasks. This solution eliminates the need for multiple tools, reducing costs and saving time and effort for operations staff.TI Illustration TEMS Investigation supports all major technologies – GSM/GPRS, EDGE, WCDMA, HSPA/HSPA+, LTE (including TD-LTE), CDMA, EVDO, WiMAX and TD-SCDMA – and major vendor handsets, making it the ideal solution both for rolling out new networks and for ensuring seamless integration with existing networks. Using TEMS Investigation, operators can achieve improved voice quality, increased accessibility, improved retainability, and better service performance. A wide range of powerful, easy-to-use features makes TEMS Investigation essential throughout the network’s life cycle. Use TEMS Investigation to:
    • Tune and optimize networks
    • Perform fault-tracing and wireless network troubleshooting
    • Verify true terminal behavior with phone based measurements
    • Verify cell coverage and capacity, as well as accessibility, retainability, and integrity
    • Perform indoor, pedestrian, and outdoor wireless network measurements
  • Anritsu’s S311D Site Master is the latest addition to the successful Site Master Cable & Antenna analyzer. It builds upon Anritsu’s expertise in developing accurate, portable, rugged, and easy-to-use field instrument aimed at simplifying life for field users. The Site Master is the ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers testing the RF performance of P25 and TETRA radios in the VHF/UHF, 400 MHz, 700 MHz, and 800 MHz bands. The high performance 25 MHz to 1600 MHz cable & antenna analyzer can be used to sweep cables and antenna systems. Option 2 extends the lower frequency range to 2 MHz. Frequency Domain Reflectometry (FDR) based Return Loss and VSWR measurements are used to characterize antenna systems. The Distance-To-Fault (DTF) measurement can easily spot poor connections, contamination, damaged cables, and water penetration. The fast sweep speed results in significant time savings for the technicians. FlexCal broadband calibration allows troubleshooting cable and antenna systems without multiple calibrations and calibration setups. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. The High Accuracy Power Meter provides true RMS measurements from 50 MHz to 6 GHz. It is the ideal solution for making accurate measurements of both CW and modulated signals. The S311D Site Master also includes optional channelized power meter, broadband power monitor, and GPS receiver. The S311D model Site Master Handheld Cable and Antenna analyzer includes data analysis software, soft carrying case, rechargeable/field-replaceable battery, AC/DC power supply, 12V automobile cigarette lighter adapter and users guide.
  • Feel free to contact us: Mobile: 0344 3813810 This Milwaukee infrared laser thermometer provides a safe and accurate way to measure surface temperature for a wide variety of applications and features a 12 to 1 distance to spot ratio and a K-Type thermocouple for contact temperature. The instrument is equipped with a slide rail system that enables you to add proprietary accessories and on-board contact measurement jacks help to improve accuracy. The unit is designed with heavy duty ergonomic pistol grip and rugged over-molding for increased durability.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Functions : Velocity, airflow, temperature. 8, 000 measuring points DATALOGGER software (option) Anemometer
    • Ø 70 mm vane : from 0,3 to 35 m/s
    • Ø 100 mm : from 0,25 to 35 m/s
    • Ø 14 mm : from 0,8 to 25 m/s
    • hotwire : from 0,15 to 30 m/s
  • Functions : Relative humidity, dew point and temperature. 8, 000 measuring points DATALOGGER software (option)
  • Capacitive sensing element for relative humidity measurement Inside the probes, a capacitive polymer layer reacts with the humidity present between two metal layers which cover a glass substract. Water absorption is a function of relative humidity of the surrounding environment, and modifies the dielectric constant. The measured signal is directly proportionnal to the relative humidity and is dependent on the atmospheric pressure.
  • unctions : Relative humidity, dew point and temperature. Measuring range Humidity : 5 to 95 %HR Temperature : -20 to +80°C Dew point : -40 to +80°Ctd Supplied with hygrometrie probe, transport case and calibration certificat
  • Multi-parameters portable device : Pressure, air velocity, airflow, hygrometry, temperature, air quality, tachometry. Memory : up to 12 000 measurement points Dataloger software for data recording and processing (option). Supplied with calibration certificate and alu transport case.
  • KIMO has designed and manufactured the flow cones as an essential instrument for measuring direct air flows in ventilators and HVAC systems. These instruments can be associated with the hot wire and vane Ø 100 mm anemometers from Class 100, 200 and 300 portable instruments. Many models are available according to the flow, the dimensions of the diffusers and the probe used.
  • HP Textile Yarn Package Hardness Tester The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.
  • Feel free to contact us: Mobile: 0344 3813810
    Has your solenoid tester ever over-heated, melted, burned out, or worse? The new, full-featured Fluke T+PRO Electrical Tester offers all the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. The Fluke T+PRO Electrical Tester is the ideal, full-featured tester for the demanding commercial and industrial electrician.  With voltage measurement, continuity, built-in flashlights, GFCI trip capability, and Fluke’s legendary ruggedness and reliability, the tester is an excellent choice for most residential, commercial, and industrial applications. The Fluke T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing. The Fluke T+PRO helps electricians comply with NPFA 70E Article 110.9 (A), which states that “Test equipment … shall be rated for circuits and equipment to which they will be connected. The T+PRO Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work. Applications:
    • Industrial electricians, commercial electricians, particularly those who work on low-voltage lighting.
    • Front-line electrical troubleshooting
    • AC/DC voltage measurement
    • Continuity testing
    • Testing GFCI circuits
    • Resistance measurement
    • Checking the rotation of electrical motors
    • Checking the proper set up of 3-phase systems
    • Troubleshooting low-voltage lighting
    What’s Included:
    • User manual
    • Test lead wrap
    • Fluke TP2 test probes
    • 2 AAA batteries
  • Feel free to contact us: Mobile: 0344 3813810
    Electrical tester with OpenJawTM Current The Fluke T5-1000 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-1000, all you have to do is select volts, ohms, or current and the tester does the rest. The OpenJawcurrent lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReachtest probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Also available in 600V – see the Fluke T5-600 Voltage, Continuity and Current Tester
  • Feel free to contact us: Mobile: 0344 3813810
    • CAT III Rating 600v
    • Low Pass Filter
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
     
Go to Top