Electrical Archives - buysolar.pk

Fluke 345 Power Quality Clamp Meter
Details
Fluke 8808A Digital Multimeter
Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications
5.5 digit resolution
Basic V dc accuracy of 0.01 %
Dual display
Dedicated dc leakage current measurement
2×4 ohms 4-wire measurement technique
Six dedicated buttons for fast access to instrument setups
Hi/Lo limit compare for Pass/Fail testing
The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do.Six setup buttons on the Fluke 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy!The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement.What’s Included:
Meter
TL71 test leads
Line cord
Spare line fuse
Statement of cal practices
WEEE information sheet
Warranty statement
Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
CD Rom with user manual (English)
Details
Fluke 1750 Three-Phase Power Quality Recorder
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time.Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries.Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment.The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired).Applications:Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctionsWhat’s Included:
1750 aquisition unit
PDA wireless “front panel interface” and charger power plug adapters
4 – 400A current probes (3140)
5 Test leads and clips
SD memory card
Fluke Power View and Fluke Power Analyze software
Power cord with international plug set
Ethernet cable
Color localization set
Printed Getting Started manual
Product CD with software and user manual PDF
Details
Fluke 1744 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810
The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues.The Fluke 1744 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
V, A, W, VA, VAR
Power Factor
Energy
Flicker
Voltage
THD
Harmonics, Interharmonics
Mains Signaling
Unbalance
Frequency
Apart from the Fluke 1744, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1745.
The Fluke 1743 includes the same features as the Fluke 1743 but is not capable of measuring voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
The main difference between the 1744 and the other 2 models in the series, is the 1744 measure harmonics, unbalance or mains signaling but doesn’t have an LCD display and only has a 3 hour UPS.The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard.Applications:
Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
Quality of service compliance – Validate incoming power quality at the service entrance
Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
Load studies – Verify electrical system capacity before adding loads
Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
What’s Included:
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD
Details
Fluke 1743 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues.The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:
V, A, W, VA, VAR
Power Factor
Energy
Flicker
Voltage
THD
Apart from the Fluke 1743, the Fluke 1740 series includes two other power quality loggers: Fluke 1744 & Fluke 1745.
The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
The main difference between the 1743 and the other 2 models in the series, is the 1743 does not measure harmonics, unbalance or mains signaling. If you need to require these measurements, we recommend looking at the higher models.Software:The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard.Applications:
Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
Quality of service compliance – Validate incoming power quality at the service entrance
Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
Load studies – Verify electrical system capacity before adding loads
Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
What’s Included:
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD
Details
Fluke 381 Remote Display True-RMS 1000 A AC/DC Clamp Meter with iFlex
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Add to cart Details
Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex
Rs.0
Feel free to contact us: Mobile: 0344 3813810
True-RMS 1000A AC/DC
Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
CAT III/IV Safety ratings
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 375 True-RMS 600A AC/DC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
CAT IV 600
CAT III 1000 V
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 373 True-RMS 600 A AC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
True-RMS
600 A AC/DC
Works with iFlex flexible current probes
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Detachable Jaw clamp
Built in Flash/Torch light
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 902 True-rms HVAC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
CAT III Rating 600v
Low Pass Filter
3 years Warranty
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw.The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365.Replacing the Fluke 337The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF
What’s Included:
18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries
Add to cart Details
Fluke 360 Leakage Current Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement.Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety.The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components.. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor.The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability.Why leakage current testing?Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation.What’s Included:
Soft carrying pouch
Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese
Add to cart Details
Fluke 353 True-rms 2000 A Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings.Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements.Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.Applications:Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systemsWhat’s Included:Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty
Add to cart Details
Fluke 345 Power Quality Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Ideal for VSDs, UPS, lighting
AC/DC with low pass filter
Data logging records results
2 Years Warranty
The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads.The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics.With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms.The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads.Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems.Applications:Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs Load studies – Verify electrical system capacity before adding loadsWhat’s Included:345 Power Quality Clamp Meter Soft carrying case Power Log software Test leads Alligator clips Test probes USB cable International ac adapter / battery eliminator Printed English language user manual Multi-language manual CD
Add to cart Details
Fluke 321 Digital AC Clamp Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Auto Power Off
Weight 230 g (8oz)
2 Years Warranty
Measure inrush motor starting current the way a circuit breaker sees it!Now everyone on your crew can have a Fluke Clamp Meter. This new smaller sized model offers accurate low current measurements, continuity test function and Fluke reliability.The Fluke 321 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. This affordable instrument combine a compact package with a strong feature set:New smaller size fits easily into tight places Precise measurements with 1.8% basic accuracy Resolution up to 0.01A and 0.1 V Measures AC current to 400 A Measures AC volts to 600 V Resistance measurement to 400 Ω Continuity for quick checking of shorts Automatic low battery indicator Display hold function Two year warrantyWhat’s Included:(2) AAA Alkaline batteries Instruction card Safety information sheet Soft carrying case Test leads
Add to cart Details
Fluke 1623 Basic GEO Earth Ground Tester Kit
Rs.0
The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications.The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test.Testing Methods
3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
The Fluke 1625 offers these advanced features:
Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
Adjustable limits – for quick test result verification.
Earth ground resistance and soil resistivity should be measured when:
Designing earth ground systems
Installing new ground system and electrical equipment
Periodically testing ground and lightning protection systems
Installing large electrical equipment such as transformers, switchgears, machines, etc.
The Fluke 1625 is the stand-alone unit For a basic model see the Fluke 1623What’s Included:
Fluke 1625 tester
2 test leads
2 alligator clips
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
selective/stakeless clamp set (one inducing, one sensing)
Batteries
Users manual
Rugged carrying case
Add to cart Details

Title