• The CHECK-LINE YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, and other filaments using a unique “wrapper” roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc.
  • A complete solution for wireless network testing, troubleshooting, and optimization, including LTE drive testing Mobile operators must troubleshoot and optimize the performance of their wireless networks from rollout through expansion to ensure availability and quality. For this, they need a wireless drive test optimization and troubleshooting tool that can continuously evolve to support today’s and tomorrow’s wireless network technologies while keeping total cost of ownership (TCO) down. TEMS Investigation is the industry-leading tool for wireless network troubleshooting, verification, optimization, and maintenance of wireless networks. Offering data collection, real-time analysis, and post-processing all in one, TEMS Investigation is a comprehensive solution for all of a network operator’s daily wireless network optimization tasks. This solution eliminates the need for multiple tools, reducing costs and saving time and effort for operations staff.TI Illustration TEMS Investigation supports all major technologies – GSM/GPRS, EDGE, WCDMA, HSPA/HSPA+, LTE (including TD-LTE), CDMA, EVDO, WiMAX and TD-SCDMA – and major vendor handsets, making it the ideal solution both for rolling out new networks and for ensuring seamless integration with existing networks. Using TEMS Investigation, operators can achieve improved voice quality, increased accessibility, improved retainability, and better service performance. A wide range of powerful, easy-to-use features makes TEMS Investigation essential throughout the network’s life cycle. Use TEMS Investigation to:
    • Tune and optimize networks
    • Perform fault-tracing and wireless network troubleshooting
    • Verify true terminal behavior with phone based measurements
    • Verify cell coverage and capacity, as well as accessibility, retainability, and integrity
    • Perform indoor, pedestrian, and outdoor wireless network measurements
  • Anritsu’s S311D Site Master is the latest addition to the successful Site Master Cable & Antenna analyzer. It builds upon Anritsu’s expertise in developing accurate, portable, rugged, and easy-to-use field instrument aimed at simplifying life for field users. The Site Master is the ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers testing the RF performance of P25 and TETRA radios in the VHF/UHF, 400 MHz, 700 MHz, and 800 MHz bands. The high performance 25 MHz to 1600 MHz cable & antenna analyzer can be used to sweep cables and antenna systems. Option 2 extends the lower frequency range to 2 MHz. Frequency Domain Reflectometry (FDR) based Return Loss and VSWR measurements are used to characterize antenna systems. The Distance-To-Fault (DTF) measurement can easily spot poor connections, contamination, damaged cables, and water penetration. The fast sweep speed results in significant time savings for the technicians. FlexCal broadband calibration allows troubleshooting cable and antenna systems without multiple calibrations and calibration setups. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. The High Accuracy Power Meter provides true RMS measurements from 50 MHz to 6 GHz. It is the ideal solution for making accurate measurements of both CW and modulated signals. The S311D Site Master also includes optional channelized power meter, broadband power monitor, and GPS receiver. The S311D model Site Master Handheld Cable and Antenna analyzer includes data analysis software, soft carrying case, rechargeable/field-replaceable battery, AC/DC power supply, 12V automobile cigarette lighter adapter and users guide.
  • Feel free to contact us: Mobile: 0344 3813810 This Milwaukee infrared laser thermometer provides a safe and accurate way to measure surface temperature for a wide variety of applications and features a 12 to 1 distance to spot ratio and a K-Type thermocouple for contact temperature. The instrument is equipped with a slide rail system that enables you to add proprietary accessories and on-board contact measurement jacks help to improve accuracy. The unit is designed with heavy duty ergonomic pistol grip and rugged over-molding for increased durability.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Functions : Velocity, airflow, temperature. 8, 000 measuring points DATALOGGER software (option) Anemometer
    • Ø 70 mm vane : from 0,3 to 35 m/s
    • Ø 100 mm : from 0,25 to 35 m/s
    • Ø 14 mm : from 0,8 to 25 m/s
    • hotwire : from 0,15 to 30 m/s
  • Functions : Relative humidity, dew point and temperature. 8, 000 measuring points DATALOGGER software (option)
  • Capacitive sensing element for relative humidity measurement Inside the probes, a capacitive polymer layer reacts with the humidity present between two metal layers which cover a glass substract. Water absorption is a function of relative humidity of the surrounding environment, and modifies the dielectric constant. The measured signal is directly proportionnal to the relative humidity and is dependent on the atmospheric pressure.
  • unctions : Relative humidity, dew point and temperature. Measuring range Humidity : 5 to 95 %HR Temperature : -20 to +80°C Dew point : -40 to +80°Ctd Supplied with hygrometrie probe, transport case and calibration certificat
  • Multi-parameters portable device : Pressure, air velocity, airflow, hygrometry, temperature, air quality, tachometry. Memory : up to 12 000 measurement points Dataloger software for data recording and processing (option). Supplied with calibration certificate and alu transport case.
  • KIMO has designed and manufactured the flow cones as an essential instrument for measuring direct air flows in ventilators and HVAC systems. These instruments can be associated with the hot wire and vane Ø 100 mm anemometers from Class 100, 200 and 300 portable instruments. Many models are available according to the flow, the dimensions of the diffusers and the probe used.
  • HP Textile Yarn Package Hardness Tester The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.
  • Feel free to contact us: Mobile: 0344 3813810
    Has your solenoid tester ever over-heated, melted, burned out, or worse? The new, full-featured Fluke T+PRO Electrical Tester offers all the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. The Fluke T+PRO Electrical Tester is the ideal, full-featured tester for the demanding commercial and industrial electrician.  With voltage measurement, continuity, built-in flashlights, GFCI trip capability, and Fluke’s legendary ruggedness and reliability, the tester is an excellent choice for most residential, commercial, and industrial applications. The Fluke T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing. The Fluke T+PRO helps electricians comply with NPFA 70E Article 110.9 (A), which states that “Test equipment … shall be rated for circuits and equipment to which they will be connected. The T+PRO Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work. Applications:
    • Industrial electricians, commercial electricians, particularly those who work on low-voltage lighting.
    • Front-line electrical troubleshooting
    • AC/DC voltage measurement
    • Continuity testing
    • Testing GFCI circuits
    • Resistance measurement
    • Checking the rotation of electrical motors
    • Checking the proper set up of 3-phase systems
    • Troubleshooting low-voltage lighting
    What’s Included:
    • User manual
    • Test lead wrap
    • Fluke TP2 test probes
    • 2 AAA batteries
  • Feel free to contact us: Mobile: 0344 3813810
    Electrical tester with OpenJawTM Current The Fluke T5-1000 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-1000, all you have to do is select volts, ohms, or current and the tester does the rest. The OpenJawcurrent lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReachtest probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Also available in 600V – see the Fluke T5-600 Voltage, Continuity and Current Tester
  • Feel free to contact us: Mobile: 0344 3813810
    • CAT III Rating 600v
    • Low Pass Filter
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
     
  • Feel free to contact us: Mobile: 0344 3813810
    A complete automotive diagnostic package with everything you need in an automotive multimeter The new Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty. The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection. Combo Kit Includes: 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual. The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. What’s Included:
    • Fluke 88V Automotive Multimeter
    • Fluke TL224 Heat Resistant Silicone Test Leads
    • Fluke TP220 Removable Sharp Point Test Probes
    • Fluke AC285 Large Jaw Alligator Clips
    • Fluke TPAK Magnetic Hanger
    • Fluke 80BK Temperature Probe
    • Fluke RPM80 Inductive Pick-up
    • Automotive Backprobe Pins
    • Insulation Piercing Probe
    • Packaged in a durable carrying case (Fluke C800)
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 8845A Bench Top 6.5 digit Precision Multimeter has the precision and versatility to handle your most demanding measurements, on the bench or in a system. These meters are both high performance and feature rich, yet also remarkably easy to use. The Fluke 8845A Bench Top 6.5 digit Precision Multimeter performs the functions you would expect to see in a multifunction DMM, including measuring volts, ohms, and amps. Basic V dc accuracy of up to 0.0024 %, 10 A current range, and a wide ohms range give you an unbeatable combination of measurement capability. You can also use the the Fluke 8845A Bench Top 6.5 digit Precision Multimeter to measure frequency and period.  The functions of a counter, capacitance meter, and thermometer are built in for unparalleled versatility. Extend the meters’ utility even more with their graphical display modes, including Trendplot paperless recorder mode, statistics and histograms—features you won’t find on other multimeters. Of course, the meter is also durable and dependable, features you expect from any Fluke meter. This unique combination of features and performance makes the Fluke 8845A Bench Top 6.5 digit Precision Multimeter an unbeatable value for a wide variety of applications, including manufacturing test, research and development, and service. What’s Included:
    • TL71 Test Lead Set, Premium DMM
    • LCI Line Core
    • Spare Line Power Fuse
    • Statement of Calibration Practices
    • WEEE Information Sheet
    • Warranty Information
    • Programmer, Users and Service Manuals (CD-ROM)
    • FlukeView Forms – Basic for 8845/8846
  • Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications
    • 5.5 digit resolution
    • Basic V dc accuracy of 0.01 %
    • Dual display
    • Dedicated dc leakage current measurement
    • 2×4 ohms 4-wire measurement technique
    • Six dedicated buttons for fast access to instrument setups
    • Hi/Lo limit compare for Pass/Fail testing
    The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. Six setup buttons on the Fluke 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy! The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement. What’s Included:
    • Meter
    • TL71 test leads
    • Line cord
    • Spare line fuse
    • Statement of cal practices
    • WEEE information sheet
    • Warranty statement
    • Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
    • CD Rom with user manual (English)
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. The Fluke 87V/E2 Industrial Electrician Combo Kit makes troubleshooting more productive with standard meter hanging accessory for handsfree operation, soft case for protection and storage, 1.5 m heat resistant silicone test leads and more. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    •  Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    •  Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. See the Fluke 87V – Industrial True-rms Multimeter with Temperature Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke 87V Industrial Multimeter
    • Fluke AC220 retractable long reach alligator clips
    • Fluke C35 lightweight soft case to provide optimal protection and storage
    • Fluke TPAK ToolPak meter haning accessory to hold meter to steel surfaces
    • Fluke TL224 1.5 m silicone leads resist head
    • Fluke TP238 removable probes with 4 mm of exposed metal to use on industrial circuits
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK K-type temperature probe
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 787 Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool. A maintenance and calibration tool that will be at home in every instrumentation technician’s tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the Fluke 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you’re tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power – the Fluke 787 ProcessMeter. Also see the Fluke 789 ProcessMeter What’s Included:
    • Alligator Clips
    • Protective Yellow Holster with test lead storage
    • One 9V alkaline battery
    • Fluke TL75 Safety-Designed Test lead Set
    • Product over and Users Manual (CD-ROM) in 14 languages
  • Feel free to contact us: Mobile: 0344 3813810
    Versatile digital multimeter for maintenance, field service and bench repair. The NEW Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. The Fluke Model 77-IV is a battery-powered, average responding-rms indicating multimeter, with a 6000-count, 3 3/4-digit display, and a bar graph. Measures:
    • AC / DC voltage & current
    • Wide 1000 V measurement range
    • Average responding AC measurements
    • 0.3% accuracy
    • 10 Amps continuous (20A for 30 seconds)
    • Frequency and capacitance
    • Resistance and continuity
    • Diodes
    This multimeter meets the CAT III and CAT IV IEC 61010 standards. Look at the Fluke 73-III Digital Mulitimeter or the waterproof design Fluke 27-YEL Analog/Digital Multimeter What’s Included:
    • Fluke TL75 test leads
    • 9 V battery (installed)
    • Manual
  • Feel free to contact us: Mobile: 0344 3813810
    Power quality analysis plus a scope and a meter!! The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance. The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. Features include:
    • New! NiMH Battery provides extended operating time of 6.5 hours
    • Combines the most useful capabilities of a power quality analyzer, multimeter and scope
    • Simulates 3-phase power (assuming balanced loads) from a single-phase measurement
    • Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
    • Monitoring functions help track intermittent problems and power system performance
    • Menus use familiar electrical terminology
    • New! Toggle through the most commonly used power quality modes with a single keystroke
    • Records two selectable parameters for up to 16 days
    • New! 20 measurement memories to save/recall screens and data with cursor readings
    • FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
    • Measures resistance, diode voltage drop, continuity, and capacitance
    • Users / applications manual and power quality video to help answer tough questions
    • Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable
    • 3 year warranty on the Fluke 43B, 1 year on accessories
    What’s Included:
    • C120 Hard Case
    • TP1 Flat-tipped Slim-Reach™ Test Probes
    • TP4 4 mm Round Slim-Reach™ Test Probes
    • i400s AC Current Clamp
    • OC4USB Optically Isolated USB Interface Adapter
    • BP120MH Rechargeable NiMH Battery Pack (installed)
    • PM 8907 Line Voltage Adapter/Battery Charger
    • SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
    • Shielded Banana-to-BNC Adapter
    • Users Manual / Application Guide
    • Power Quality CD-ROM
  • Feel free to contact us: Mobile: 0344 3813810 Power quality analysis plus a scope and a meter!! The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance. The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. Features include:
    • New! NiMH Battery provides extended operating time of 6.5 hours
    • Combines the most useful capabilities of a power quality analyzer, multimeter and scope
    • Simulates 3-phase power (assuming balanced loads) from a single-phase measurement
    • Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
    • Monitoring functions help track intermittent problems and power system performance
    • Menus use familiar electrical terminology
    • New! Toggle through the most commonly used power quality modes with a single keystroke
    • Records two selectable parameters for up to 16 days
    • New! 20 measurement memories to save/recall screens and data with cursor readings
    • FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
    • Measures resistance, diode voltage drop, continuity, and capacitance
    • Users / applications manual and power quality video to help answer tough questions
    • Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable
    • 3 year warranty on the Fluke 43B, 1 year on accessories
    What’s Included:
    • C120 Hard Case
    • TP1 Flat-tipped Slim-Reach™ Test Probes
    • TP4 4 mm Round Slim-Reach™ Test Probes
    • i400s AC Current Clamp
    • OC4USB Optically Isolated USB Interface Adapter
    • BP120MH Rechargeable NiMH Battery Pack (installed)
    • PM 8907 Line Voltage Adapter/Battery Charger
    • SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
    • Shielded Banana-to-BNC Adapter
    • Users Manual / Application Guide
    • Power Quality CD-ROM
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 435 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 435 offers unique features like AutoTrend, which records everything on the screen automatically; System-Monitor, a quick diagnosis of system performance against user defined limits; Logger Function with multi-parameter logging; and Mains Signaling, measures interference from ripple control signals at specific frequencies. These features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 435 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating Fully Class A Compliant – conduct tests according to the stringent international IEC 61000-4-30 Class A standard. With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 435 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (16 MB) memory stores up to 50 screens. A detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:
    • Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
    • Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
    • Quality of Service Compliance – Validate incoming power quality at the service entrance
    • Long-term Analysis – Uncover hard-to-find or intermittent issues
    • Load Studies – Verify electrical system capacity before adding loads
    • Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving device
    What’s Included:
    • Fluke C435 Water-tight hard case with rollers
    • Fluke i430s 4x 3000A flexible current clamps, CAT IV 600 V rated
    • Fluke TLS430 5 Test leads, 4 black, 1 green
    • Fluke BC430 Battery Charger Eliminator
    • FlukeView Software SW43W
    • Fluke PowerLog Software
    • Fluke OC4USB Optical Cable for USB
    • Fluke WC100 Color localization set
    • Getting Started printed
    • User Manual (CD-ROM)
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 434/PWR power analyzer is the ideal tool for finding energy waste in commercial and factory buildings and equipment. Electricians, field service engineers and maintenance technicians can use this special edition instrument to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis according to EN 50160. Fluke’s 434/PWR is a complete three-phase troubleshooting tool that measures virtually every power system parameter: voltage, current, frequency, power, energy consumption, cos f or power factor, unbalance, and harmonics and inter-harmonics. The Fluke 434/PWR is an upgraded version of the popular 434 model. It now includes the previously optional logging feature, Inrush and Transients measurement functions. In addition, it includes four iFlex 430, flexible current probes and a new soft case. The bundled PowerLog software enables logged files to be downloaded and reports generated automatically (the standard voltage leads and clips are included).

    Load studies and energy assessments

    • Monitor maximum power demand over user-defined averaging periods
    • Demonstrate the benefit of efficiency improvements with energy consumption tests
    • Measure harmonic distortion caused by electronic loads
    • Analyze reliability problems by capturing voltage dips and swells from load switching

    Applications

    • Load studies – verify electrical system capacity before adding loads
    • Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
    • Frontline troubleshooting – quickly diagnose problems on‐screen to get your operation back online
    • Quality of service compliance – validate incoming power quality at the service entrance
    • Long‐term analysis – uncover hard‐to‐find or intermittent issues
    • Analyze reliability problems by capturing voltage dips and swells from load switching
    What’s Included:
    • i430-Flexipack 4 current clamps
    • 5 Test leads, 4 black, 1 green
    • 5 Alligator clips, 4 black, 1 green
    • BC430 Battery charger eliminator
    • Power Log Software
    • OC4USB Optical cable for USB
    • WC100 Color localization set
    • Getting Started (booklet)
    • User Manual (CD-ROM)
  • Feel free to contact us: Mobile: 0344 3813810 Pinpoint power problems faster, safer and in greater detail! The Fluke 434 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 434 offers unique features like AutoTrend, which records everything on the screen automatically, and System-Monitor, a quick diagnosis of system performance against user defined limits and Logger Function (optional functionality can be added with upgrade kit Fluke 434/LOG). Together the features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 434 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 434 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (8 MB) memory stores up to 50 screens and up to 10 measurements each comprising 32 parameters – including setups and trend data – recorded for more than a year, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:
    • Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
    • Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
    • Quality of Service Compliance – Validate incoming power quality at the service entrance
    • Long-term Analysis – Uncover hard-to-find or intermittent issues
    • Load Studies – Verify electrical system capacity before adding loads
    • Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving devices
    For greater value and capabilities see also the Fluke 435 What’s Included:
    • Fluke C430 Hard carrying case
    • Fluke i400s 4 current clamps, CAT IV 600 V
    • Fluke TLS430 5 Test leads, 4 black, 1 green
    • Fluke BC430 Battery Charger Eliminator
    • FlukeView Software SW43W
    • Fluke OC4USB Optical Cable for USB
    • Fluke WC100 Color localization set
    • Getting Started printed
    • User Manual (CD-ROM)
  • Feel free to contact us: Mobile: 0344 3813810
    • True-RMS 1000A AC/DC
    • Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
    • CAT III/IV Safety ratings
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
  • Feel free to contact us: Mobile: 0344 3813810
    • CAT IV 600
    • CAT III 1000 V
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
  • Feel free to contact us: Mobile: 0344 3813810
    • True-RMS
    • 600 A AC/DC
    • Works with iFlex flexible current probes
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
  • Feel free to contact us: Mobile: 0344 3813810
    • Detachable Jaw clamp
    • Built in Flash/Torch light
    • 3 years Warranty
    The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:
    • CAT IV 600, CAT III 1000 V
    • iFlex 2500 A AC
    • 1000 V AC/DC
    • mV DC
    • 60 kΩ
    • 1000 μF
    What’s Included:
    • 18-inch iFlex flexible current probe – i2500-18
    • TL75 test leads
    • Coated instruction card
    • Safety information sheet
    • Soft carrying case
    • Two AA Alkaline batteries
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement. Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components..  The ergonomic design of the Fluke 360 ensures easy measuring.  The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor. The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. What’s Included:
    • Soft carrying pouch
    • Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese
  • Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings. Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. Applications: Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systems What’s Included: Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty
  • Feel free to contact us: Mobile: 0344 3813810
    • Ideal for VSDs, UPS, lighting
    • AC/DC with low pass filter
    • Data logging records results
    • 2 Years Warranty
    The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications: Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs Load studies – Verify electrical system capacity before adding loads What’s Included: 345 Power Quality Clamp Meter Soft carrying case Power Log software Test leads Alligator clips Test probes USB cable International ac adapter / battery eliminator Printed English language user manual Multi-language manual CD
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:
    • Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
    • Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
    • Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
    • Load studies – Verify electrical system capacity before adding loads
    What’s Included:
    • 345 Power Quality Clamp Meter
    • Soft carrying case
    • Power Log software
    • Test leads
    • Alligator clips
    • Test probes
    • USB cable
    • International ac adapter / battery eliminator
    • Printed English language user manual
    • Multi-language manual CD
  • Feel free to contact us: Mobile: 0344 3813810 he Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:
    • Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
    • Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
    • Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
    • Load studies – Verify electrical system capacity before adding loads
    What’s Included:
    • 345 Power Quality Clamp Meter
    • Soft carrying case
    • Power Log software
    • Test leads
    • Alligator clips
    • Test probes
    • USB cable
    • International ac adapter / battery eliminator
    • Printed English language user manual
    • Multi-language manual CD
  • Feel free to contact us: Mobile: 0344 3813810
    • Auto Power Off
    • Weight 230 g (8oz)
    • 2 Years Warranty
    Measure inrush motor starting current the way a circuit breaker sees it! Now everyone on your crew can have a Fluke Clamp Meter. This new smaller sized model offers accurate low current measurements, continuity test function and Fluke reliability. The Fluke 321 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. This affordable instrument combine a compact package with a strong feature set: New smaller size fits easily into tight places Precise measurements with 1.8% basic accuracy Resolution up to 0.01A and 0.1 V Measures AC current to 400 A Measures AC volts to 600 V Resistance measurement to 400 Ω Continuity for quick checking of shorts Automatic low battery indicator Display hold function Two year warranty What’s Included: (2) AAA Alkaline batteries Instruction card Safety information sheet Soft carrying case Test leads
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 2AC is the latest addition to the VoltAlert™ ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
    • Voltage detection from 90 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.
    • NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.
    • NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*
    • Category IV – 1000 V overvoltage rated product for best in class user protection
    • Integrated clip design, optimized for pocket storage
    • Powered by 2x AAA batteries (included)
    • Fluke ruggedness and reliability
    • Two-year warranty
  • Feel free to contact us: Mobile: 0344 3813810 The industrial meter for demanding users. New diagnostic functionality for maximizing productivity in the plant. The new Fluke 289 True-RMS Industrial Logging Multimeter with TrendCapture is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems. Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit APPLICATIONS:
    • Install or maintaining electronic machinery/plant equipment
    • Testing adjustable speed motor drives
    • Log and record results
    • In-plant automation applications
    • Power distribution
    • Electro-mechanical equipment service
    • Industrial electronics
    What’s Included:
    • Manual
    • 6 AA Batteries, installed
    • TL71 Silicone Test Leads
    • Probe Holder
    • Two AC72 Alligator Clips
    Supplemental Material:
    • Registration Card
    • Cal Practices Document
    • CD-ROM Users’ Manual (16 languages)
    • Getting Started Manual
    • Calibration Certification Sheet
  • Feel free to contact us: Mobile: 0344 3813810
    Maximize productivity with the combined Fluke 287 and FlukeView forms combo kit. Designed for today’s professionals involved in the R & D, maintenance, manufacture and design of electronic circuits or systems. With built-in data logger and TrendCapture (the meters on screen graphical display) cabability,  the 287 helps you track down elusive, intermittent problems or monitor equipment with any of its functions. FlukeView Forms enables you to document, store, and analyze individual readings or series of measurements, overlay logged data to find cause and effect relationships, or turn your data into meaningful graphs and tables for a professional report. The 287/FVF combo kit gives you a practical and affordable approach to documenting circuit design performance. What’s Included:
    • Fluke-287 True-rms Electronic Logging Multimeter with TrendCapture
    • FlukeView Forms Software and cable
    • 80BK-A Thermocouple Probe
    • CAT III 1000 V 10 A Modular test leads (red, black)
    • CAT III 1000 V 10 A Modular test probes (red, black)
    • CAT II 300 V 5 A Alligator Clips (red, black)
    • C280 Soft Case for meter protection and accessory storage
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precision APPLICATIONS:
    • Develop, install, or maintain electronic devices
    • Precision testing of surface mount and high density circuits
    • Customers who need to log and record results to solve intermittent problems
    • Communication; wireless, wired, LAN, broadband, CATV, audio/video
    • Industrial / Electrical equipment
    • Instrumentation (example: test and medical equipment)
    • Consumer electronics
    • Automotive
    • Education
    • Security
    What’s Included:
    • Manual
    • 6 AA Batteries, installed
    • TL71 Silicone Test Leads
    • Probe Holder
    • Two AC72 Alligator Clips
    Supplemental Material:
    • Registration Card
    • Cal Practices Document
    • CD-ROM Users’ Manual (16 languages)
    • Getting Started Manual
    • Calibration Certification Sheet
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 28-II multimeter is the new standard for rugged Fluke 28 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Fluke 28-II has an IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. This meter is built to work in the toughest environments.
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
    • Frequency to 200 kHz
    • Extended ac voltage bandwidth – 40 Hz to 30 kHz
    • Resistance, continuity and diode test
    • Min/Max and average recording to capture variations automatically
    • Peak min-max
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
    • Designed to withstand 3 meter drop (with holster)
    • True-rms ac voltage and current for accurate measurements on non-linear loads
    • Hi resolution 20,000 count display mode
    • Backlit keypad buttons allow for easy visibility in lowlit areas
    • Large display digits and 2 level bright white backlight for increased visibility
    • Reversible holster for added protection when not in use
    • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
    • Long battery life (800 hours)
    • Relative mode to remove test lead resistance from low ohms measurements
    • Auto and manual ranging for maximum flexibility
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
    • MSHA approval (pending)
  • Feel free to contact us: Mobile: 0344 3813810 The new standard for rugged Fluke 27 II and Fluke 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
    • Frequency to 200 kHz
    • Extended ac voltage bandwidth – 40 Hz to 30 kHz
    • Resistance, continuity and diode test
    • Min/Max and average recording to capture variations automatically
    • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
    • Designed to withstand 3 meter drop (with holster)
    • Average responding voltage and current for measurements (Fluke 28-II is TRMS)
    • Backlit keypad buttons allow for easy visibility in lowlit areas
    • Large display digits and 2 level bright white backlight for increased visibility
    • Reversible holster for added protection when not in use
    • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
    • Long battery life (800 hours)
    • Relative mode to remove test lead resistance from low ohms measurements
    • Auto and manual ranging for maximum flexibility
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
    • MSHA approval (pending)
    Note: for a TRMS version of this Fluke 27-II that also includes built-in temperature measurement and a unique Low Pass filter for measuring accurate readings when working on variable speed drives (VFDs/VSDs) see the Fluke 28-II industrial multimeter.
  • Feel free to contact us: Mobile: 0344 3813810 The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas. Imagine the possibilities! What would you do if you could be in two places at once?
    • True-rms ac voltage and current for accurate measurements on non-linear signals
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)
    • 10,000 μF capacitance range
    • Frequency to 50 kHz
    • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Resistance, continuity and diode test
    • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
    • The removable magnetic display can be conveniently mounted where it is easily seen
    • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
    • Use as a conventional multimeter when the display is connected
    • Radio transmitter automatically turns off when the display is connected to the meter
    • Auto power off maximizes battery life
    • Min/Max and Average recording to capture variations automatically
    • Test continuity and diodes
    • Easy to read display with large digits and bright backlight
    • Battery life approximately 400 hours
Go to Top