Multimeters Archives - buysolar.pk

Fluke 113 Basic Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 True-rms Basic Multimeter designed for basic electrical testsThe Fluke 113 Basic Multimeter gives utility users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems.The Fluke 113 Basic Multimeter has significant improvements over Fluke’s original 7-600, and other utility multimeters. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity.The Fluke 113 Basic Multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this new meter is a must have for the utility users toolbox.What’s Included:
Fluke TL75 test leads
Holster
Users manual
and 9 V battery (installed).
Add to cart Details
Fluke 114 Electrical Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke.Compact true-rms meter for electrical troubleshooting. The Fluke 114 is a battery-powered, true-rms multimeter the perfect troubleshooting tool for “go/no-go” testing. It includes a feature to prevent false readings caused by ghost voltage.Also check out the Fluke 115 Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.What’s Included:
Holster
Installed 9 V battery
Test leads
User manual
Add to cart Details
Fluke 115 True RMS Digital Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke.Compact true-rms meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications.Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.
Add to cart Details
Fluke 116 HVAC Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Designed by electricians. Engineered by Fluke.The Fluke 116 HVAC Multimeter features temperature and microamps measurements useful for heating, ventilation, air conditioning and refrigeration (HVAC/R) technicians. The Fluke 116 is a compact true-rms meter and has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.The Fluke 116 also, has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. What’s Included:
4 mm silicone test lead set
80BK Integrated Temperature probe
Holster
Installed 9 V battery
User manual
Add to cart Details
Fluke 117 Electrician’s Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Designed by electricians. Engineered by Fluke.Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.The Fluke 117 has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
The Fluke 117 also includes the built-in VoltAlert non-contact voltage function. Located on the top of the meter above the LCD display, it’s another feature handy for detecting the invisible. The VoltAlert function detects the presence of ac voltage, sounds an audible tone and activates a red LED indicator light on the top center of the LCD display. Using this feature before making a contact measurement can add an extra layer of safety.Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 116 HVAC Multimeter with Temperature and Microamps.What’s Included:
4 mm silicone test lead set
Holster
User manual
Add to cart Details
Fluke 1577 Insulation Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Two powerful tools in oneThe Fluke 1577 Insulation Multimeter combine a digital 1 kV insulation tester with a full-featured, true-rms digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks.For a greater capabilities purchase the Fluke 1587 Insulation MultimeterWhat’s Included:
Remote probe
Test leads
Alligator clips
Hard case
User documentation
Add to cart Details
Fluke 175 True RMS Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair.The Fluke 175 True-rms digital multimeter has the features needed to find most electrical, electronic, electro-mechanical and heating and ventilation problems. Simple to use with significant improvements like True-rms, frequency, capacitance and min-max record.Check the features and specifications using the tabs above.Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes.Want better accuracy and a backlight see the Fluke 177 Also available with temperature as Fluke 179
Add to cart Details
Fluke 179 True RMS Digital Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Versatile meter for maintenance, field service and bench repair.The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record.The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display with backlight that’s easier to view.Check the features and specifications using the tabs above.Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes.For even greater value, the Fluke 179 is also available in the following kits:Fluke 179/EDA2 Electronics Multimeter and Deluxe Accessory Combo Kit or Fluke 179/1AC-II Electrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak Combo Kit or Fluke 179/IMSK Digital Multimeter & Clamp Meter Combo KitAlso available with no temperature as Fluke 177 or as Fluke 175What’s Included:
Fluke 80BK Temperature Probe
Fluke TL75 Test Leads
Installed 9V battery
Users manual
Add to cart Details
Fluke 233 Multimeter with Wireless Remote Display
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas.Imagine the possibilities! What would you do if you could be in two places at once?
True-rms ac voltage and current for accurate measurements on non-linear signals
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 50 kHz
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Resistance, continuity and diode test
Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
The removable magnetic display can be conveniently mounted where it is easily seen
Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
Use as a conventional multimeter when the display is connected
Radio transmitter automatically turns off when the display is connected to the meter
Auto power off maximizes battery life
Min/Max and Average recording to capture variations automatically
Test continuity and diodes
Easy to read display with large digits and bright backlight
Battery life approximately 400 hours
Add to cart Details
Fluke 27-II Industrial Multimeter with IP67 rating
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The new standard for rugged Fluke 27 II and Fluke 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth – 40 Hz to 30 kHz
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
Average responding voltage and current for measurements (Fluke 28-II is TRMS)
Backlit keypad buttons allow for easy visibility in lowlit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
MSHA approval (pending)
Note: for a TRMS version of this Fluke 27-II that also includes built-in temperature measurement and a unique Low Pass filter for measuring accurate readings when working on variable speed drives (VFDs/VSDs) see the Fluke 28-II industrial multimeter.
Add to cart Details
Fluke 28-II TRMS Industrial Multimeter with IP67 Rating
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 28-II multimeter is the new standard for rugged Fluke 28 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Fluke 28-II has an IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. This meter is built to work in the toughest environments.
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth – 40 Hz to 30 kHz
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Peak min-max
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
True-rms ac voltage and current for accurate measurements on non-linear loads
Hi resolution 20,000 count display mode
Backlit keypad buttons allow for easy visibility in lowlit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
MSHA approval (pending)
Add to cart Details
Fluke 287 Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend.The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precisionAPPLICATIONS:
Develop, install, or maintain electronic devices
Precision testing of surface mount and high density circuits
Customers who need to log and record results to solve intermittent problems
Communication; wireless, wired, LAN, broadband, CATV, audio/video
Industrial / Electrical equipment
Instrumentation (example: test and medical equipment)
Consumer electronics
Automotive
Education
Security
What’s Included:
Manual
6 AA Batteries, installed
TL71 Silicone Test Leads
Probe Holder
Two AC72 Alligator Clips
Supplemental Material:
Registration Card
Cal Practices Document
CD-ROM Users’ Manual (16 languages)
Getting Started Manual
Calibration Certification Sheet
Add to cart Details
Fluke 289 Logging Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810 The industrial meter for demanding users.New diagnostic functionality for maximizing productivity in the plant. The new Fluke 289 True-RMS Industrial Logging Multimeter with TrendCapture is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment.With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems.Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo KitAPPLICATIONS:
Install or maintaining electronic machinery/plant equipment
Testing adjustable speed motor drives
Log and record results
In-plant automation applications
Power distribution
Electro-mechanical equipment service
Industrial electronics
What’s Included:
Manual
6 AA Batteries, installed
TL71 Silicone Test Leads
Probe Holder
Two AC72 Alligator Clips
Supplemental Material:
Registration Card
Cal Practices Document
CD-ROM Users’ Manual (16 languages)
Getting Started Manual
Calibration Certification Sheet
Add to cart Details
Fluke 77-IV Digital Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
Versatile digital multimeter for maintenance, field service and bench repair.The NEW Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view.The Fluke Model 77-IV is a battery-powered, average responding-rms indicating multimeter, with a 6000-count, 3 3/4-digit display, and a bar graph.Measures:
AC / DC voltage & current
Wide 1000 V measurement range
Average responding AC measurements
0.3% accuracy
10 Amps continuous (20A for 30 seconds)
Frequency and capacitance
Resistance and continuity
Diodes
This multimeter meets the CAT III and CAT IV IEC 61010 standards.Look at the Fluke 73-III Digital Mulitimeter or the waterproof design Fluke 27-YEL Analog/Digital MultimeterWhat’s Included:
Fluke TL75 test leads
9 V battery (installed)
Manual
Add to cart Details
Fluke 787 Process Meter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 787 Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool.A maintenance and calibration tool that will be at home in every instrumentation technician’s tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the Fluke 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution.Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you’re tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power – the Fluke 787 ProcessMeter.Also see the Fluke 789 ProcessMeterWhat’s Included:
Alligator Clips
Protective Yellow Holster with test lead storage
One 9V alkaline battery
Fluke TL75 Safety-Designed Test lead Set
Product over and Users Manual (CD-ROM) in 14 languages
Add to cart Details
Fluke 87V Industrial True RMS Multimeter
Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench.The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment.With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Large digit display with bright, two-level backlight
Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83VWhat’s Included:
Fluke TL75 test leads
Fluke AC72 Alligator Clips
Holster
9V battery (installed)
Getting Started Manual
CD with detailed manual
Fluke 80BK temperature probe
Add to cart Details

Title